2005 Acura Rl Awd Tech Package Nav 38k Miles on 2040-cars

Auto blog

2021 Acura TLX vs. luxury sedans: How they compare on paper

The 2021 Acura TLX has been revealed, and it looks superb. We also have a handful of hard numbers, so you know that we've got to take a look at how they compare to the competition. As we only have numbers for the base turbocharged four-cylinder model, we're only looking at similarly equipped competitors. And with the small to midsize luxury sedan segment burgeoning these days, we've selected a mix of rear-drive, front-drive and all-wheel-drive options to compare to this front-drive-based sedan. You can see the raw numbers below, and a summary of them under that. Engine and transmission The Acura's base engine is a turbocharged 2.0-liter four-cylinder, just like the vast majority of cars in its segment. It's an especially powerful base engine, though, with 272 horses. That tops every base engine in this group, and is only topped by Volvo's mid-range turbocharged and supercharged four-cylinder that makes 316 horsepower. Its torque rating is strong, too, falling short of the aforementioned Volvo engine and the BMW four-cylinder. You'll note that we've included two four-cylinder engines for the Audi and the Volvo. With the Audi, the entry-level engine is seriously underpowered versus the competition, whereas the higher-output version is more comparable, so we felt it should be included. As for the Volvo, since the turbo and supercharged engine isn't quite comparable to each of these model's six-cylinder alternatives, we felt it should be mentioned, here. Many of these cars have substantially more powerful alternatives available, including the Acura. The Acura will have a twin-turbo 3.0-liter V6, but we have no specifications for it. It will face off with the 382-horsepower BMW M340i, 400-horsepower Volvo S60 T8 hybrid, 365-horsepower Genesis G70 3.3T and 349-horsepower Audi S4, among others. The Acura is available with either front-wheel drive or all-wheel drive, and every version gets a 10-speed automatic, giving it claim to the most gears. All the other cars here make do with an eight-speed automatic. The Genesis G70 is the sole offering with a manual transmission, something that's offered on the Sport trim with upgraded brakes and a limited-slip differential. The Audi is unique in making all-wheel drive standard. On the Volvo, all-wheel-drive is only available if you upgrade to the higher-output engine, another reason why we wanted to include it. Size On the outside, the Acura is the largest, or more specifically, the longest.

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.

Acura NSX prototype gets back on track

Developing a new vehicle is not without its complications, we're sure, but usually things follow a fairly predictable progression: you develop a prototype, you test it, test it and test it again, then you put it into production. What you don't expect is that your prototype will burn to the ground, but that's what famously happened to the NSX which Honda engineers were testing a few months ago.
Fortunately, the Acura NSX prototype is back on track, both literally and figuratively, as you can see from this latest batch of spy shots snapped at the Nürburgring. This camouflaged prototype looks pretty much the same as the last one, only, you know... less crispy. Which is to say, it looks pretty much ready to hit showrooms.
The naysayers may point out that Honda chose colder and damper weather to put the NSX back into testing - thereby mitigating the risk of another fire - but we're sure the Japanese automaker has been working hard to fix the flammability issues, whatever may have caused them, over the past few months. At least, we hope they have.