Awd W/technology Package Runs And Drives New Salvage Flood 907a Low Miles 4 Dr S on 2040-cars

Auto blog

2020 Acura NSX Suspension Deep Dive

The Acura NSX has been a special car as long as I’ve been in the business. The first one came out in 1990, the same year I started my career in automotive engineering. I vividly remember driving one briefly back then when we brought one in for benchmarking. I'd drive it again 22 years later when my previous employer bought a used 1991 example for a long-term test. Reader interest was sky-high and the car was still gorgeous, but the march of time and automotive engineering had clearly left it behind. Then, in 2016, a second-generation NSX emerged, and it was packed with bleeding-edge thinking. It has a 3.5-liter twin-turbo V6, but this new NSX is a hybrid with an electric motor-generator sandwiched between the engine and its nine-speed DCT transmission. Two more electric motors – one for each wheel – power the front axle. There they can add traction, regenerate electricity under braking and dole out hyper-accurate levels of torque vectoring. The carÂ’s tire package was changed from Continental SportContact 5 to SportContact 6 tires in 2019, and numerous suspension re-tuning tweaks came along with them. The result is a lively and well-balanced car that is relentless when driven hard and a pussycat around town. LetÂ’s see what theyÂ’ve got going on under there.   At first glance the 2020 Acura NSX appears to have dual wishbone front suspension. But we canÂ’t tell for sure because that big two-piece brake rotor is in the way. The coil-over shock looks obvious, but a few odd details are apparent even from here.   This view also seems to indicate double wishbone suspension. But the pivot axis (green arrow) between the upper and lower ball joints looks wrong – itÂ’s far too vertical. WeÂ’re missing something. But I would be remiss if I failed to point out a few other things before we moved on. For one, the front drive axle confirms this to be an all-wheel-drive machine. Second, the forged aluminum damper mounting fork (yellow) that envelops the axle is mounted to the lower arm about 75% out from the armÂ’s inner pivot. The spring and damper motion ratio would be 0.75-to-1 relative to wheel movement, with a tiny reduction due to its lean angle. Lastly, just look at the huge cast aluminum upright (white). Beautiful. Normally these are called hub carriers or steering knuckles, and I use the terms interchangeably. But the motorsports-derived term upright is normally applied when the piece is tall and, well, upright like this one.   This explains everything.

2016 Acura NSX grows into its updated styling for the 2015 Detroit Auto Show [w/videos]

It's not immediately clear at first glance, but the Acura NSX as it appears on the floor at the 2015 Detroit Auto Show is a far cry from the concept from the 2013 show. These days, the NSX packs a twin-turbo, longitudinally mounted V6 with over 550 horsepower on tap and nine-speed dual-clutch gearbox. Although, the three-motor hybrid setup remains with two units at the front and one for the rear axle. The numerous slashes and scoops make the design look much more aggressive than the earlier concept, but the changes go much deeper than the new skin. There's an inch of extra width and 3.1-inches more overall, including 0.8-inches extra length in the wheelbase. Underneath it all, is a carbon fiber floor and aluminum-intensive chassis to provide strength to harness all of its power. Unfortunately, Acura isn't specifically announcing engine output, the weight or the design's drag coefficienct yet, so there are still questions to answer. However production starts in fall 2015 with the order books opening in the summer. Pricing is among the factors that the Japanese brand isn't discussing, but it likely costs about $150,000 to park the company's latest supercar in your driveway. In the meantime, enjoy admiring this upcoming entry in the hybrid supercar market. Related Video:

Acura introduces a sleeker self-driving test car

As we creep ever closer to an autonomous-car future, one thing is for certain, most of the driverless cars we see being tested look hideous thanks to all the sensors strapped to the roof. Today Acura introduced its second generation Automated Acura RLX Development Vehicle with updated sensors and a more pleasing aesthetic. Gone is the spinning LIDAR system replaced with a more compact and robust version of the light detection and ranging technology. It's also got updated RADAR, camera, GPS and higher performance GPUs and CPUs as well as what Acura is calling "more intelligent software algorithms to support more complex testing scenarios." Acura and its parent company Honda have been testing autonomous cars at its GoMentum Station in the Bay Area since last year with a specially outfitted RLX (shown in the video above with the spinning LIDAR system). This new car will replace that vehicle. This article by Roberto Baldwin originally ran on Engadget, the definitive guide to this connected life. Green Acura Honda Transportation Alternatives Technology Emerging Technologies Autonomous Vehicles Videos Sedan transportation gear