2011 Acura Rdx Shaw Tech Super Low Miles on 2040-cars

Auto blog

Honda recalling 183k cars and crossovers over unintended braking issue

A recall has been issued for nearly 183,000 Honda and Acura brand vehicles from the 2005 and 2006 model years. The problem stems from a potential malfunctions to the vehicles' stability control and braking systems.
Drivers have reported a malfunction to Honda's Vehicle Stability Assist system, though to date, no crashes or injuries have been reported as a result of it. Some of the vehicles' Vehicle Stability Assist (VSA) control units may have an electric capacitor that was damaged during manufacture. A damaged control unit could cause the VSA system to apply brake force for a "fraction of a second" without any driver input, or could add additional brake force if it malfunctions while the driver is already braking. Either example could increase the risk of a crash.
To fix the issue, Honda will install a new electrical sub-harness, free of charge to the owner. The recall specifies 101,000 Honda Pilot (pictured), 60,000 Acura MDX and 21,000 Acura RL vehicles from the 2005 model year will be affected. An additional 800 MDX crossovers from the 2006 model year are also included in the recall. In addition, 51,000 of the affected 2005 Pilots will be inspected to be sure that a ground bolt for the VSA system is properly tight. Should this bolt come lose, similar unexpected brake activation may occur.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.

Acura recalling nearly 20k new MDX crossovers over AWD driveshafts

Acura is recalling nearly 20,000 of its 2014 MDX crossovers fitted with all-wheel drive over driveshaft concerns. The affected vehicles were built between May 6, 2013 and October 14, 2013, and have bolts that attach the driveshaft to the transmission that may not have been tightened properly.
Needless to say, an improperly secured driveshaft could lead to a number of problems, including everything from excessive drivetrain noise to full driveshaft detachment, a condition which could result in a loss of power and crash.
There's been no reports of accidents, injuries or deaths relating to the driveshaft issues. Acura will begin notifying all 19,197 owners in question of the recall, and will request that they report in for repairs, which will consist of tightening the driveshaft-attaching bolts. Scroll down for the official bulletin from NHTSA.