Mdx Navigation Black 96,000 Miles on 2040-cars

Auto blog

Acura NSX ScienceofSpeed Dream Project brings another wing to SEMA

Acura rolled into SEMA last year with its non-hybrid NSX GT3 race car, that FIA spec-series competitor pulled to Vegas on a trailer behind a GT3-themed Acura MDX. Sticking with the GT3 theme this year but going road-legal, Acura worked with Arizona-based ScienceofSpeed on a GT3 package that NSX owners can put in driveways. The result is the lower, more powerful, more wing-y NSX "Dream Project." Liquid-cooled injecting for the twin-turbo boosts output, adding 37 horsepower for a total of 610, and another 31 pound-feet of torque to register 507. A lightweight steel exhaust sheds 16 pounds and bestows those magnified numbers with magnified bass. A custom suspension drops the coupe by a little more than an inch, a custom iLIFT suspension add-on automatically raises the front axle two inches if the NSX detects a hurdle. The ScienceofSpeed aero kit includes all you'd expect from the alphanumeric "GT3:" front strakes, wider rocker panels, larger rear diffuser, a rear wing, gold powdercoated carbon ceramic Brembo brakes, and wider Pirelli Trofeo R tires wrapped around Advan GT forged wheels. Drench the package in two-tone Andaro Nouvelle Blue Pearl and gloss black roof, and the NSX Dream Project's ready to be driven from climate-controlled garage, to parking-lot car show, back to climate-controlled garage. If the owner decides to test a limit or two, Recaro Pole Position seats and a gaugeART OLED display will keep him locked in and informed. Related Video:

Junkyard Gem: 1997 Acura SLX

By the second half of the 1990s, the tremendous sales success of the Ford Explorer (introduced as a 1991 model) and Jeep Grand Cherokee (introduced as a 1993 model) had made it clear clear that the future of the American road would be trucks. Any automotive manufacturer not selling a full line of SUV-ish machinery here would be irrelevant soon after the dawn of the new century, and the car-and-bike-centric American Honda Motor Company was therefore in big trouble. The Civic could be used as the basis for a small crossover SUV (which debuted here as the 1997 Honda CR-V), but Honda needed to buy time to design and produce the platform that would underpin the 2001 Acura MDX and 2003 Honda Pilot. That time was purchased via a deal to sell rebadged Isuzu trucks as Hondas and Acuras. Today's Junkyard Gem is one of those Honda-ized Isuzus, found in a Colorado boneyard. Honda began selling the Isuzu Rodeo as the Passport (recycling the name they'd used on the U.S.-market Super Cub motorcycle) for the 1994 model year, and Acura dealers started moving SLX-badged Isuzu Troopers in the 1997 model year. Just to make things interesting in the Isuzu-Honda world, North American Isuzu dealers sold Honda Odysseys with Isuzu Oasis badges at the same time. Isuzu had gone all-truck for the American market after the last Styluses (and closely related Geo Storms) were sold here as 1993 models. Sadly, Isuzu's final (non-commercial) new vehicles sold here were rebadged Chevy Trailblazers and Colorados, more than 30 years after Chevrolet began selling Isuzu Faster pickups here with LUV badges. Honda never did build any body-on-frame trucks, but that proved unnecessary in order to make some money during the CUV/SUV era. The SLX never sold particularly well, but it gave Acura dealers a luxury truck to park next to the Integras, TLs, RLs, CLs and NSXs in their showrooms. After 1999, the SLX was gone, leaving just the 2000 model year as a blank spot for Acura-badged SUVs. This truck held together like a real Honda product, getting fairly close to the 300,000-mile mark (I've found junkyard Accords with better than a half-million miles on their odometers, plus one apiece Civic and CR-V that got past 400,000 miles during their lives). The original owner's manuals were still in the glovebox when I found this truck. At the end, it appears that it was towed away for being parked illegally. Maybe the engine or transmission failed and its final owner just walked away.

Acura confirms more 2016 NSX details

Acura served up a slew of engineering details about the soon-to-launch 2016 NSX. Fittingly, they were explained at a dinner at the SAE International World Congress in Detroit, where morsels about the new Acura supercar were likely gobbled up quicker than the main course. Among the highlights: The NSX will mark Acura's first use of a multimaterial space frame, and it includes high-strength steel and aluminum. This will allow the NSX to hit its weight targets, while maintaining rigidity. The NSX uses a so-called "ablation" technology, which allows the ultra-rigid castings to be used within the car's crush zones. For more details on this, scroll through the press blast below. As expected, the NSX will pack a twin-turbo V6 engine, and Acura confirmed it will displace 3.5 liters. The unit will be mounted amidships and team with hybrid components to increase performance and efficiency. The supercar also features the most advanced evolution of Acura's Super Handling All-Wheel-Drive system, and it's capable of distributing more torque than any other setup the brand has used. The NSX has 10 air-cooled heat exchangers that will cool the powertrain, and the V6 alone will have three radiators. There are also twin intercoolers in the side air intakes that further cool the system. The next generation of the NSX was unveiled in January at the Detroit Auto Show, and production launches this fall in Ohio. Related Video: New Technical Details of the Next Generation Acura NSX Revealed at SAE 2015 World Congress and Exhibition . DETROIT, April 23, 2015 – In advance of the market launch of the highly anticipated next generation Acura NSX, the engineers leading the supercar's development shared new technical details and design strategies with the automotive engineering community at the April 22nd SAE Detroit Section dinner, held in conjunction with the SAE 2015 World Congress and Exhibition. Additional information about the team's efforts to achieve a true "New Sports Experience" included details of the NSX's world's first body construction process that helped create a multi-material space frame resulting in class-leading body rigidity, the advanced total airflow management system and an update on NSX's power unit specifications. Ted Klaus, chief engineer and global development leader of the new NSX, introduced key powertrain, body and dynamic performance engineers who shared new product and technical details in their related areas of the development.