7-days *no Reserve* '10 Mdx Awd Tech Pkg Nav Xenon Warranty Carfax on 2040-cars

Auto blog

Honda, Acura recall Ridgeline, Accord, MDX, TLX for various fuel pump issues

Honda and Acura have issued two separate fuel pump-related recalls for Ridgeline pickups, as well as Accord and TLX sedans, and MDX SUVs. Affected Ridgelines could have an increased risk of fire, while the Accord, TLX, and MDX could potentially stall out while driving. According to NHTSA campaign No. 19V053000, Honda is recalling 106,683 2017-2019 Ridgelines because the fuel pump feed port could crack when exposed to certain acids, including car wash soaps. If it cracks, it could leak pressurized fuel, which could catch fire. Vehicles with this defect are subject to a free fuel pump replacement, as well as an extra fuel pump cover. The second recall, campaign No. 19V060000, affects 437,032 2016-2018 MDX, 2015-2019 TLX, and 2015-2017 Accord models equipped with 3.5-liter V6 engines. According to Honda, fuel particulates could stick to internal components of the fuel pump. This could potentially slow down the fuel pump and hinder performance, which could cause the engine to sputter and stall. Honda dealers will update the fuel injection engine control unit software and/or replace the fuel pump, if needed. If you want to know if your vehicle is included in one of these recalls, contact your Honda or Acura dealer, call the NHTSA hotline at 1-888-327-4236, or visit safecar.gov. Related Video:

2022 Acura RDX update makes a lot of good stuff standard

When the third-generation Acura RDX launched for 2019, our test drive found it to be a fine return to form for the Acura brand. Not only did it cast aside the humdrum personality of the second-gen, but it gave itself a reason to exist in the crowded luxury compact crossover field. In fact, it landed competitively mid-pack amongst the German Grossen Drei of Mercedes, Audi and disappointing BMW. Though we did have a gripe about how certain packages weren't available on certain trims, with the 2022 update Acura has rectified that very complaint. We'll get to that in a minute, but first let's start with the base RDX. Acura says that one of the biggest improvements comes in the form of noise, or lack thereof. We didn't think the 2019 model was particularly noisy, but  Acura says the cabin is "dramatically quieter." Though they don't provide a decibel reading, they do inform us that a retuned Active Sound Control system and new front fender liners help reduce road noise. New for 2022, the next-level-up Technology Package takes noise reduction even further, with thicker carpets and acoustic glass in the front doors. New sound insulation in the those doors, under the dash pad and in the D-pillars also help keep road, wind and engine noise out of the cabin. The package also comes with a rear camera washer. The top-spec Advance Package adds even more sound deadening material to the headliner, dash, hood, drivetrain tunnel and rear hatch. Here, the rear doors get acoustic glass and noise insulation to match the fronts as well. Power-folding side mirrors and a 12-volt power outlet in the cargo round out the changes for 2022. Best of all — and this is the nit we picked in our 2019 test drive — the sporty A-Spec package is at last offered with the Advance Package. This wasn't the case before, inexplicably leaving the adaptive dampers off of A-Spec models. Now the look finally matches the equipment. In addition, A-Spec cars get some of their exterior bits dipped in gunmetal and gloss black finishes set them apart visually. Inside, a flat-bottomed sport steering wheel is unique to the package, along with other interior exclusives and an available bronze finish on interior aluminum bits if you choose the Saddle Brown upholstery. If those aren't special enough, Acura is once again offering a limited-production PMC Edition of the 2022 RDX.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.