2022 Acura Mdx Advance on 2040-cars

Auto blog

Acura ILX Type S could get 300-hp turbo four

There's good news and bad news when it comes to the new Honda Civic Type R. The good news is that after more than a year of prototypes and concepts, the Japanese automaker's new hot hatch is about to make its production debut next month. The bad news is that it's not coming here, but there is a silver lining in even that dark rain cloud – namely, that Honda plans on slotting its 2.0-liter VTEC turbo four into something that it will actually offer Stateside. Earlier rumors suggested the US donor vehicle would also be a Civic, but the latest intel indicates it could be something different, albeit related. According to Car and Driver, which spoke recently with Acura product planning manager Gary Robinson, Honda's luxury division could be gearing up to shoehorn the engine into the recently updated ILX – which itself is based on the Civic. "Acura is always going to get the best engines Honda makes," said Robinson. "Obviously a 2.0-liter turbo is more of a must-have in the luxury world than it is in the mainstream" market, suggesting that an ILX Type S could be in the works with upwards of 300 horsepower. Getting it to fit, though, could prove a rather large challenge – and could mean the engine swap would have to wait until the next-generation model comes around. Considering that the ILX was just updated for 2016, C/D doesn't expect the full redesign to come until 2018 at the earliest. Here's hoping that if it takes that long, Honda will slot the engine into something else for US showrooms in the meantime. The revival of the Type S badge in and of itself, however, makes for an enticing prospect. The last time we saw it used was on the larger TL sedan, which upgraded the 3.2-liter V6 from the 225 horsepower to 260. Before that, the RSX jumped from 160 horsepower in the base model to 200 in the first Type S, 210 in the second and 217 in the ultimate Type R. As it stands, the new ILX (after dropping the hybrid and base 2.0 models, is powered exclusively by a 2.4-liter inline four with 201 hp on tap.

Acura TLX Luggage Test | Perfectly reasonable trunk space

The Acura TLX has a 13.5-cubic-foot trunk according to the spec sheet. That would be comparable to a typical compact mainstream sedan despite the TLX's exterior dimensions being more akin to a midsize sedan (its 194.6-inch length is right smack between a Toyota Camry and Honda Accord). Luxury cars usually sacrifice utility for style, and by adapting cab-rearward proportions for this latest generation, it shouldn't be surprising that the TLX follows the trend.  However, how much utility does the new TLX sacrifice and is the trunk still useful? Let's find out. It's a fairly deep space, but the amount of width and space behind the wheel wells is also reasonably generous and seemingly useful. As with every luggage test, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D).  To start off, I lined the biggest bags on their sides to demonstrate the difference in the trunk's width relative other sedans. Only three can fit, whereas you can fit four in the majority of midsize sedans. Nevertheless, all the bags fit. That's not the case with the Cadillac CT4 or CT5, or the big fibber, the BMW 3 Series and its "17-cubic-foot" trunk.  Basically, the numbers make sense here. While it can hold all the bags, there really isn't any leftover space as there is in a midsize sedan. That said, I should note that there are plenty of compact crossovers that can't fit all these bags below their cargo covers, including the Mercedes GLC and Alfa Stelvio.  OK, one more trunk-related note. While there is a spare-tire-shaped hole under the trunk floor, there is no spare tire. Instead, you get a compressor encased in foam covering the car's battery. Putting the battery in the trunk is totally normal, but there's something a tad bootleg about this placement. It seems like an afterthought. It almost certainly has to do with engine compartment packaging and/or weight distribution, but it does mean you do without a spare tire. Or, I suppose as BMW is apt to do, extra under-floor cargo space.  Related Content  

2019 Acura RDX infotainment first impressions | A first step into the touch pad world

One of the greatest design challenges in the modern automotive industry is an infotainment system that provides loads of capabilities, but is also easy-to-use and not overly distracting. Touch screens have been leading the way as the favored option, but Acura is trying a new design that relies on a touch pad with some unique tweaks to separate it from similar systems, such as those seen in competing Lexus models. And we got to try it out in the first production application, the 2019 Acura RDX compact crossover. The key feature of the touch pad is its one-to-one position functionality. What that means is that, if you have a grid of function buttons on the screen, tapping on, say, the upper left corner of the pad will highlight the button in the same area on the screen. And if you were to take your finger off the pad and tap in the opposite corner, that section of the screen would immediately be highlighted. You don't have to slide your finger across the pad to reach selections if you don't want to, and you don't have to slide back from the last function you highlighted. It basically does away with the need to move a cursor around like you would on a laptop with its mouse pad. In practice, it's a little odd to use at first because we mentally connect using a touch pad with the traditional cursor interface of the laptops we use day in and day out. As such, we forgot that we didn't have to scan the screen for the cursor every time we needed to select something. But once we remembered we could skip that, we found it quick and easy to drop our finger down and slide to our preferred function quickly. We could occasionally even pick something on the corners without having to slide at all. This is partly because Acura designed the interface to work with this pad. A representative from Acura's R&D center explained that they tried to put common functions on those corners because they're easy to reach without looking or thinking much. Another bonus to this system is that you don't immediately go to the function the second you press the pad. Instead, the feature is highlighted and still needs a physical click to enter. This is enormously helpful, since it virtually eliminates the chance of going to the wrong selection because you hit a bump or just got lazy with finger placement. Instead, you can get your finger in the right spot and then commit with a button press.