2011 Acura Mdx Advance W/entertainment on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

2014 Acura MDX shows up exactly as expected

Acura (and parent company Honda, for that matter) doesn't always leave a lot to be left to the imagination when they unveil prototypes at auto shows. Case in point: Take a gander at the Acura MDX Prototype that debuted at the Detroit Auto Show this past January, and then look at the production-spec 2014 MDX pictured above. See what we mean?
Design-wise, there frankly isn't a whole lot to get excited about with this MDX. Sure, a lot of the chiseled, sharp lines from the previous-generation model have been smoothed out in favor of something that will likely have more mass-market appeal, but to our eyes, the MDX has simply lost a lot of its visual flair in the process. To quote Autoblog senior editor Seyth Miersma, this new one just looks like the old one after melting by 10 percent. The end result is something that more closely resembles the company's smaller RDX crossover than anything else, with other subtle design elements mimicking what we've seen on the ILX and RLX sedans. It's all fine, but again, not exciting. The good news, however, is that thanks to the use of new lightweight materials, the 2014 MDX is 275 pounds lighter than the outgoing model.
Updates to what's underneath the MDX's new skin are hardly surprising, but still welcome. Power comes from a direct-injected 3.5-liter V6 making 290 horsepower and 267 pound-feet of torque, mated to a six-speed automatic transmission with both front-wheel drive and Acura's Super-Handling All-Wheel Drive on offer. Acura estimates that front-drive models will achieve 20/28/23 miles per gallon (city/highway/combined), and says that adding the SH-AWD drops those numbers to 18/27/21. Acura will offer a new Integrated Dynamic System that allows the driver to choose between normal, sport and comfort settings, and the new MDX will ride on a choice of either 18- or 19-inch alloy wheels.

The future of Acura is coming to Detroit

What you're looking at here is a teaser of the Acura Precision Concept – a showcar that will introduce the new design language for the brand. Acura is determined to inject some a larger performance aura into its brand, and for now, it plans to do that with stronger design language. "The Acura Precision Concept will serve as the inspiration for the styling and proportion of the next-generation of Acura vehicles, especially for our sedans," says design director Dave Marek. We like what we see, too. The showcar has a long hood, short rear deck, and very strong character lines down the side. Those are classic rear-wheel-drive proportions, but as we know, that's kind of a long-shot for a new Acura. We'll see the full concept at the Detroit Auto Show in January. Here's hoping it looks awesome. Acura Precision Concept to Debut at 2016 North American International Auto ShowCreated by Acura's U.S. design team, Acura Precision Concept points to performance focus of future Acura design TORRANCE, Calif. (Dec. 18, 2015) – Acura will unveil the Acura Precision Concept at the 2016 North American International Auto Show in Detroit on January 12 at 8:00 am ET, the brand announced today. Created by the Acura Design Studio in California, the Acura Precision Concept will help set the direction for future Acura design; in particular, the next generation of performance-luxury sedans. "The Acura Precision Concept will signal the stronger and sharper focus of Acura styling on our core DNA we call 'precision crafted performance'," said Dave Marek, global creative director for the Acura brand. "It is our intention to more strongly express performance through design and the Acura Precision Concept will serve as the inspiration for the styling and proportion of the next-generation of Acura vehicles, especially for our sedans." Acura today also announced details of its launch plans for the next-generation NSX supercar, coming to market next spring. Acura is on track to post its fourth consecutive year of U.S. sales growth in 2015, and best sales since 2007, with sales up 6.9 percent through November.