12 Acura Mdx Awd Navigation Sunroof Leather Clean Carfax 1 Owner We Finance on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

How the Autoblog staff would configure the 2017 Acura NSX

The configurator for the 2017 Acura NSX is now online, and it finally lets people spec this long-delayed supercar. Technically prices start at $157,800 (after $1,800 for destination), but you can't actually get one like that yet. The iron brake rotors aren't available until late 2016, which means the carbon-ceramic rotors with black calipers are the least expensive choice at $9,900. The cost ticks up to $10,600 if you want calipers in silver or red. The build process inspired so much conversation among the Autoblog staff that we decided to share our choices with you and explain why we picked them. Let us know what you think in the comments. MICHAEL AUSTIN - $198,950: Mine's expensive, but I figure another 15 percent or so is irrelevant when the car already costs so much. I love the blue - it's alluring without being too flashy. Saddle leather is a must for me; it's definitely the best interior color. I skipped the carbon-fiber exterior sport package, just because I like the cleaner look of the standard body. Otherwise, carbon-fiber overkill: roof, rear spoiler, interior trim, and engine cover. If I had to cut costs I could sacrifice the $10,600 carbon ceramic brakes, which are probably unnecessary – but I'd have to wait until later this year. My only question is: where are the optional Michelin Pilot Super Sport tires I loved during our First Drive? CHRIS BRUCE - $180,700: I tried not to go too wild when speccing mine, but some upgrades seemed necessary. The standard black leather was too dark, so I opted for the Saddle and Alcantara, which added $1,500 to the price. I also picked with the matching black Alcantara headliner for $1,300 and the upgraded audio system for $2,800. For the outside, I loved the Nord Gray Paint, which has a little green in it, and I splurged for the $6,000 carbon fiber roof. To finish things off, I went with the silver calipers on the carbon-ceramic brakes for $10,600. STEVEN EWING - $172,700: I'm not the extravagant type. I don't want flashy colors, red calipers, or unnecessary carbon fiber crap on the outside. Give me something that flies under the radar, with the only the options I need. Plus, the NSX hardly feels like a $200,000 supercar to me. ALEX KIERSTEIN - $176,500: Japanese cars tend to look best in classic white, so I went with that for the exterior. I like a dark interior, but I also love Alcantara – so that goes on the headliner. The carbon-fiber roof is a bit of an extravagance, but this is all fantasy, right?

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.