06 Silver 4wd 3.5l V6 7-passenger Vtec Ulev Suv *heated Leather Seats*roof Rails on 2040-cars

Auto blog

2020 Acura RDX Driveway Test | How does a stroller fit?

From the people who brought you the Luggage Test, it's the Stroller Test! I know, sequels, right?  However, as someone who was recently in the market for a stroller and didn't want to buy a new/gigantic family vehicle to accommodate it (not to mention needing to potentially store it in every vehicle currently sold), knowing how big strollers were and how they might fit in cars was important.  Now, I can't do much in terms of testing a variety of strollers. For that, I would direct you to Baby Gear Lab, which has quite the comprehensive stroller testing program (Wire Cutter is another good source). One of the things I appreciated about Baby Gear Lab was their independent measurements of each stroller, which through the magic of maths, they translate into more easily comparable cubic-inch measurements.  I ultimately chose the new Thule Spring, which is one of the most compact regular strollers on the market, with a folded volume of 5,402 cubic inches (my own independent measurement based on 30 inches long, 16.75 inches wide and 10.75 inches tall). By comparison, the comparable Baby Jogger City Mini 2 when folded is 8,300 cubic-inches according to Baby Gear Lab, while Thule's top-rated jogging stroller, the Urban Glide 2, is 15,388 cubic inches. In other words, if the Thule Spring takes up a lot of space in a trunk, virtually everything else apart from ultra-compact travel strollers will take up even more. This is essentially a best-case scenario.  First up, the 2020 Acura RDX, which is one of the most family friendly compact luxury crossovers. Actually, "compact" is almost a misnomer given how much passenger and cargo space is present. And don't you worry dear friends, that cargo space will be fully put to the test soon with good old-fashioned luggage. Since the RDX is first to be tested, we'll just have to consider it in a vacuum. Not many words to spill here. Now here's the Spring on its side. I already know that it can't fit like this in my Audi Allroad when the cargo cover and cargo net cartridges are in place. It would in the RDX with its cargo cover.  And that's all she wrote. Hopefully this series will prove helpful. Please let me know if there's anything else to be considered — I'm new to this. 

Acura announces NSX GT3 Evo22 race car will live on

The Acura NSX may be winding down production in 2022, but it still has some life left on the track. Today, Acura announced that it will introduce a new version of its NSX GT3 race car. It features a slew of improvements that should make the platform more competitive. Called the NSX GT3 Evo22, it builds upon the existing NSX GT3 a car that has won multiple championships in IMSA, SRO and Japan's SuperGT. The Evo22 gets improved intercoolers for the 3.5-liter twin-turbo shared with the road car, allowing it to perform consistently in a wider range of conditions and locations. Underneath, the suspension earns some tweaks in revised spring rates and geometry adjustments. To improve the car for endurance racing, the Evo22 reduces pit time with larger fluid tanks, while a revised wheel system allows for quicker tire changes. An FIA-mandated rain light illuminates the rear. Acura will also offer several air conditioning and headlight options. As with the outgoing NSX GT3, the Evo22 eschews the road car's hybrid and all-wheel-drive systems. Instead, it employs an XTRAC semi-automatic six-speed sequential transmission to send power to the rear wheels. Both the race and road car, however, share the same specs for the engine block, heads, valvetrain, crankshaft, pistons, and dry-sump lubrication system. The motors and chassis are both built at Acura's Performance Manufacturing Center in Ohio, while final assembly for the GT3 takes place in Milan, Italy. While European GT3s are supported from Italy, Honda Performance Division in Southern California will support North American teams. The NSX GT3 is the defending IMSA GTD and SRO GT Manufacturers’ Champion, and has achieved 25 IMSA and SRO class wins since its North American introduction in 2017. Interestingly, Acura says the the NSX GT3 is homologated globally through 2024. So, while new road cars won't be produced after next year, you'll still see them representing the "A" calipers at the track beyond that.

Honda recalls 2.23 million vehicles to replace Takata inflators

The Basics: Honda and Acura will recall 2.23 million vehicles in the US. The affected models are: 2005-2012 Acura RL 2007-2011 Honda CR-V 2007-2016 Acura RDX (early production MY 2016 vehicles only) 2007-2014 Honda Ridgeline 2009-2014 Honda Fit 2009-2014 Acura TL 2010-2014 Honda FCX Clarity 2010-2014 Honda Insight 2010-2013 Acura ZDX 2011-2015 Honda CR-Z 2013-2016 Acura ILX (early production MY 2016 vehicles only) The Problem: These vehicles have Takata's PSDI-5 airbag inflator on the driver's side, and this part could rupture if the airbag deploys. Injuries/Deaths: There are no reported ruptures of the PSDI-5 inflator in Honda or Acura vehicles. However, Takata's exploding components have links to at least 10 deaths worldwide because they can spray shrapnel at occupants. The Fix: Honda and Acura dealers will replace the inflators with parts from an alternative supplier. If You Own One: The repairs will begin this summer. Owners will receive a letter notifying them about the recall within 60 days and will get a second message when the parts are available. The company will prioritize older models in high-humidity regions first because these inflators would be most likely to rupture. More Information: Honda and Acura have now recalled 8.51 million vehicles in the US to replace their driver or passenger side inflators. This latest expansion came in the wake of a driver death from an airbag rupture in a Ford Ranger. Ford and Mazda already enlarged their safety campaigns. The National Highway Traffic Safety Administration also announced Audi, BMW, Daimler Vans, Mercedes-Benz, Saab, and Volkswagen would have recalls for this issue, too. Statement by American Honda Regarding Nationwide Recall of Certain Takata PSDI-5 Driver Front Airbag Inflators Feb 3, 2016 - TORRANCE, Calif. Approximately 2.23 million Takata PSDI-5 driver front airbag inflators will require replacement in Honda and Acura vehicles in the U.S. No PSDI-5 inflator ruptures have been reported in Honda or Acura vehicles Takata inflators will be replaced with parts from an alternative supplier with repairs beginning in the Summer of 2016 Based on a recent Defect Information Report (16E-005) from the airbag inflator supplier, Takata, Honda will conduct a national recall (16V-061) of approximately 2.23 million Honda and Acura vehicles in the United States to replace, free of charge to vehicle owners, the PSDI-5 Takata driver front airbag inflators installed in those vehicles.