1968 Vw Bug on 2040-cars

Auto blog

VW joins Daimler's protest of new A/C refrigerant as EU deadline for compliance passes

The case of Dupont and Honeywell's refrigerant R-1234yf is doing the exact opposite of keeping things cool. The two chemical companies have spent years and hundreds of millions of dollars developing R-1234yf to replace R-134a, the new refrigerant shown to be 99.7-percent kinder to the environment than the one it is meant to succeed. Part of that development has been years of testing by governments, outside safety agencies and automakers to approve the chemical for use in cars. It passed the protocols necessary for the European Union to declare that new and significantly revised cars from 2013 onward needed to use R-1234yf, and mandated that every car as of 2017 must use it.
Enter Daimler AG. The automaker created a head-on collision test with a B-Class at their Sindelfingen test track that would lead to the pressurized refrigerant being sprayed on the engine. The result in 20 out of 20 test was that the refrigerant burst into flames as soon as it hit the hot engine, while Daimler says that R-134a does not catch fire in the same test. Another unexpected result of the R-1234yf test was the release of hydrogen flouride, a chemical far more deadly to humans than hydrogen cyanide, emitted in such amounts that it that turned the windshield white as it began to eat into the glass.
Said a Daimler engineer in a Reuters piece, "It was scarcely believable. The most complicated lab tests conducted using the most sensitive measuring instruments around found nothing and all we do is drive a car around a couple of times, open a tiny hole in the refrigerant line and the next thing you know the car is on fire." So Daimler said it wouldn't use the refrigerant, and it recalled the cars it had already shipped with R-1234yf.

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Audi buys Ballard fuel cell patents for $80 million

While some auto companies (e.g., Toyota and Hyundai) are giving away some hydrogen fuel cell patents, others are paying a pretty penny to gain access to the H2 tech. Audi announced today that it has purchased a suite of fuel-cell patent from Ballard Power Systems. The deal between Volkswagen Group and the Canadian fuel cell pioneer is worth over $80 million US. Unsurprisingly, the value of Ballard's stock shot up about a dollar (to $2.61 as of this writing) on the announcement. VW and Ballard will also extend their development agreement, originally scheduled to end in 2017, to March 2019, and possibly another two years after that. Thus far, the deal – which revolves around the "design and manufacture of next-generation fuel cell stacks" for VW's H2 demonstration program – and Ballard says it is a leader in "critical areas of fuel cell product design – including the membrane electrode assembly (MEA), plate and stack components – along with certain testing and integration work." At the LA Auto Show last fall, VW showed off a Golf SportWagen and a Passat with a hydrogen hybrid HyMotion powertrain as well as a Audi A7 Sportback H-Tron Quattro. Audi buys fuel-cell patents from Ballard Power Systems Development agreement with Ballard extended until 2019 Audi's Head of Development Prof. Hackenberg: "The entire VW Group will use these patents." Ingolstadt/Burnaby, February 11, 2015 – AUDI AG has acquired a package of patents relating to fuel-cell technology from Ballard Power Systems Inc. In addition, the Volkswagen Group has extended its cooperation with the Canadian clean energy company until 2019. The purchase of these patents will provide new impetus for the development of fuel-cell drive systems at Audi, VW and the Volkswagen Group. As explained by Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development at AUDI AG and responsible for the steering of the development departments of all brands in the VW Group: "Audi is acquiring these strategically important patents for the entire group and will make them available to all the brands. In this way, we are securing crucial expertise that will provide new impetus for the further development of this technology." Ballard Power Systems Inc. is based in Burnaby, Canada, and is one of the world's leading companies in the technology of proton exchange membrane fuel cells.