2013 Toyota Venza 4dr Wgn I4 Fwd Le Climate Control Driver Airbag on 2040-cars

Auto blog

The 2022 Subaru BRZ and Toyota GR 86 aftermarket upgrader's guide

When you own an enthusiast car, there are few events more nerve-wracking than the introduction of its successor. Should you upgrade? Is it worthwhile? What will it cost you to part out your mods and trade up? Well, there's good news for owners of the outgoing Scion FR-S, Toyota 86 and Subaru BRZ who are considering an upgrade: You might not have to start with a clean slate.  If you’re an owner (or even a casual fan) of the Subaru BRZ/Toyota 86 family of sports coupes, youÂ’re probably already aware that the 2022 models are more like aggressive overhauls than true, ground-up redesigns. Neither company really wants to put a spotlight on the fact that their coupes are a little less "all-new" and a little more "back and better than ever," but in our opinion, this is something Subaru and Toyota should embrace.  Why? In a word: continuity. Look no further than the NA (1989-1997) and NB (1999-2005) Mazda Miata. While they are regarded as distinct generations (the NA defined by its pop-up headlights and simpler lines; the NB by its fixed lamps and swoopier styling) and were offered with different equipment packages, the fundamental underlying chassis remained relatively unchanged. This meant that, in many cases at least, buyers could trade up to a new model but bring along some of their factory and aftermarket accessories because theyÂ’d still fit. The BRZ and GR 86 are meant to be fairly bare-bones vehicles, the idea being that they appeal to those who want limited frills at a low cost and those who prefer to view cars as canvases rather than finished masterpieces. A long-running platform makes an excellent candidate for the latter type of car buyer. So, what does that mean for the 2022 BRZ and GR 86? Well, let's break it down by whatÂ’s truly new, whatÂ’s kind-of-new, and whatÂ’s essentially carry-over, with some guidance from Subaru and Toyota engineers.  2022 Subaru BRZ blue action profile View 22 Photos Spankin' new LetÂ’s start with the obvious: the styling. Even if you can find older aftermarket appearance kits that will fit the new BRZ and GR 86 on paper, they probably wonÂ’t bolt up nicely to the new cars due to their sleek new exterior designs. Wings and spoilers might still bolt up, but donÂ’t count on it, and theyÂ’ll probably look disjointed at best anyway.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota GT86 CS-R3 rally car presages for-sale customer racecar

Rallying may enjoy a very strong association with all-wheel drive, but it wasn't so long ago that the World Rally Championship was populated by cars that slipped and slid across gravel and tarmac using rear-wheel drive. One of those was the Toyota Celica. While the little Celica eventually joined the gravel-spewing masses with an all-wheel-drive rally car, Toyota is returning to its rear-drive rally roots with a modified version of the critically acclaimed GT86.
Called the CS-R3, the new model boasts all the necessary changes to turn the diminutive twin of the Scion FR-S and Subaru BRZ into a car capable of tackling the tough, twisting paths that are so routinely conquered by the world's rally cars. That means, of course, the CS-R3 has gotten a power bump.
Expected output sits between 240 and 250 horsepower, thanks to a new racing exhaust and manifold, as well as other changes. The ECU has been replaced with an item a bit more suited to racing, while the compression ratio has also been adjusted to boost the output.