2011 Used 2.7l I4 16v Automatic All-wheel Drive With Locking Differential Suv on 2040-cars

Auto blog

2017 Scion FR-S getting slight power bump?

A common refrain when discussing the Scion FR-S and its sibling the Subaru BRZ is that they are capable vehicles but are in need of more power. The latest rumors suggest that some more muscle might finally be on the way for the coupe's refresh. Don't expect something like the STI Performance Concept with a 300-horsepower, turbocharged flat-four, though – the gains in the real world are likely to be significantly more modest. According to Toyota insiders speaking with Motoring in Australia, the local Toyota GT86 (our FR-S) is due for a styling and powertrain refresh for the next model year. The 2.0-liter boxer four-cylinder engine isn't expected to get a drastic power increase, but it's not being completely neglected. A new intake manifold and friction reductions reportedly allow for five percent more grunt. If accurate, and if the changes also come here, that would take output of the US version to 210 hp and 159 pound-feet of torque. The adjustments could improve fuel economy by seven percent, as well. Handling is already a forte for the FR-S and BRZ, and things could get even better with this refresh. Motoring claims that dampers from Sachs might become standard equipment, along with a reinforced subframe. The close relationship with the BRZ reportedly rules out any dramatic changes to the styling for this update. However, the coupe is still likely to wear a new hood with vents in it, reshaped headlights, and a revised fascia with a larger lower grille. At the rear, expect a rear diffuser and exhaust pipes at the corners. While minor compared to all of these rumored updates, Scion recently gave the FR-S a few tweaks in the US for the 2016 model year (pictured above). In addition to some new colors and interior trim, it now comes standard with a seven-inch touchscreen infotainment system and rearview camera.

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.