Xsp-x Sprayed In Bedliner Leather Alloy Wheels 381hp 6 Spd Auto Back Up Camera on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

NHTSA investigating 561k Toyota Prius hybrids for possible steering shaft defect

The Detroit News is reporting that the National Highway Traffic Safety Administration will investigate some 561,000 Toyota Prius models for potentially defective steering shafts. The affected hybrid models are from the 2004-2009 model years. The story indicates that NHTSA is weighing whether or not to grant a defect petition, which claims that Toyota incorrectly assembled the hatchback's steering linkage.
As of this writing, there is no recall. However, a recall based on the Prius steering shaft would be the third related to steering issues for the model since 2006. Seven years ago, Toyota recalled 170K Prius models for potential cracking of the intermediate shafts, and in November of 2012, the automaker recalled 670K units to replace the steering shaft extension assembly.
We'll be monitoring NHTSA's signals to see if this investigation turns into a full-fledged recall. For now, stay tuned.

Toyota 86 most likely to get more power through more displacement? [w/poll]

The Sydney Morning Herald has spoken to Tetsuya Tada, chief engineer of the Toyota 86 (our version of it, the Scion FR-S, is pictured above), and they've been promised that more power is on the way. We've heard a lot of speculation about a more powerful Toyobaru since before the standard model was even launched. The only question now is how the power will be delivered, and among the engine concepts we've already heard about - turbo, supercharger, twin-charged, hybrid - is a new one: more displacement.
Tada said that an engine with more displacement than the current coupe's 2.0 liters is being tested alongside a turbocharged and a hybrid-assisted motor. The SMH cites "inside sources" as saying the displacement option is the one likely to get the go-ahead, and suggests increased bore and stroke will see the engine grow to 2.5 liters, horsepower to about 250 - a 50-hp increase over the present car.
While that's apparently the betting man's solution for the long-awaited increase in gumption, what happens with the next generation could be more wide open than we suspected. According to the report, Tada "hinted that [a successor] could be a radically different car, potentially dropping the boxer engine altogether." He said once they've sorted out the concept for the second generation car, then they'll sort out an engine. That's where a turbo option could come to market, perhaps the turbocharged four-cylinder Toyota is developing for the Lexus NX crossover or a hybrid system that uses a capacitor.