2010 Toyota Tundra Crewmax 5.7l V8 Nav Rear Cam 65k Mi Texas Direct Auto on 2040-cars

Auto blog

Autocar pits McLaren MP4-12C against turbo Toyota GT86

The Toyota GT86, in all of its forms, is one of the best-handling cars money can buy, a trait that can put a smile on the faces of all but the most jaded car enthusiasts. But if good handling isn't what they're looking for, then what is? Our first guess would have to be more power, something the 200-horsepower Toyota would benefit from. Autocar tries out that theory by driving two turbocharged GT86s on track, then pitting the more powerful one against the 616-hp McLaren MP4-12C in a track battle.
The first GT86 turbo Autocar's Steve Sutcliffe drives makes around 255 rear-wheel horsepower and a bucket-load more torque than the stock car. That's plenty of power to either have a lot of fun or get into a lot of trouble. But the GT86 that Sutcliffe tails in the McLaren is race-prepped, stripped to the bone and wears slicks to harness a heavy-hitting 335 hp at the wheel. Weighing in at under 2,500 pounds, the Toyota can't overcome the MP4-12C's power-to-weight ratio of 5.3 pounds per horsepower, but it comes pretty close.
Enjoy a lot of chasing and drifting fun in the video below!

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Lamborghini Huracan Sterrato and GMC Acadia driven | Autoblog Podcast #837

In this episode of the Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Electric, John Beltz Snyder. They're both jazzed after driving the off-road-ish and totally sublime Lamborghini Huracan Sterrato. John recently drove the new GMC Acadia, Greg spent some time in the Toyota Camry, and they also discuss Autoblog's long-term Subaru WRX. In the news, the Porsche 918 Cayman and Boxster are reportedly ending production, while it's officially the end of the road for the Nissan GT-R and Volvo S60. Fisker has officially filed for bankruptcy. Cadillac has shown off a couple cool Blackwing special editions in honor of Le Mans. Finally, we reach in the mailbag and help a listener pick a sporty convertible in this week's Spend My Money segment. Send us your questions for the Mailbag and Spend My Money at: Podcast@Autoblog.com. Autoblog Podcast #837 Get The Podcast Apple Podcasts – Subscribe to the Autoblog Podcast in iTunes Spotify – Subscribe to the Autoblog Podcast on Spotify RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving: 2024 Lamborghini Huracan Sterrato 2024 GMC Acadia 2025 Toyota Camry Long-term 2023 Subaru WRX Porsche 718 Cayman and Boxster allegedly end production in October 2025 2024 Nissan GT-R the final year for the U.S. market 2025 Volvo S60 the last model year for the sedan in the U.S. Fisker files for Chapter 11 bankruptcy 2025 Cadillac CT5-V Blackwing 'Le Monstre' and CT4-V Blackwing Petit Pataud limited editions celebrate Le Mans Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on Apple Podcasts Autoblog is now live on your smart speakers and voice assistants with the audio Autoblog Daily Digest. Say “Hey Google, play the news from Autoblog” or "Alexa, open Autoblog" to get your favorite car website in audio form every day. A narrator will take you through the biggest stories or break down one of our comprehensive test drives. Related video: Podcasts Cadillac Fisker GMC Lamborghini Nissan Porsche Subaru Toyota Volvo Coupe Crossover SUV Electric Hybrid Luxury Off-Road Vehicles Performance Supercars Sedan