Certified Low Miles One Owner Excellent Condition Clean on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Who sold the most small/midsize pickups in 2012? PickupTrucks.com investigates that, too

PickupTrucks.com has taken another look at the sales of its favorite vehicle bodystyle as part of an ongoing series. According to registration data from R.L. Polk, the Toyota Tacoma easily took the crown as America's best-selling mid-sized pickup, with 133,477 units rolling into new homes in 2012. For comparison, the second-place Nissan Frontier only saw 50,566 registrations.
We feel compelled to point out that before Ford pulled the plug on its ancient Ranger, the company was moving some 75,000 units per year. That number had shriveled to 15,662 by 2012, which was still enough to surpass the Honda Ridgeline. Interestingly enough, one person brought home a brand-new Hummer H3T as well. But mid-sized trucks represent only a fraction of total pickup sales. Dealers sold a total of 241,471 midsizers last year compared to 988,326 half-tons.
That segment was dominated by General Motors with 533,814 sales followed by Ford at 478,204. Ram Trucks trailed behind in third with 241,204 units with Toyota close behind at 229,769. Nissan, meanwhile, remains a distant fifth. Head over to PickupTrucks.com for a closer look at the breakdown in each segment.

2016 Toyota Mirai Fuel Cell Vehicle likely to get 60 MPGe

Toyota isn't talking about the Mirai's fuel economy just yet, but that doesn't mean we can't make an educated guess. And we do so by looking at the competition and knowing that the DOE says that "One kg of hydrogen is roughly equivalent to one gallon of gasoline." For now, the Mirai's H2 competition means the 2015 Hyundai Tucson Fuel Cell. It can carry 5.64 kg of hydrogen and has a range of 265 miles. If we do the division there (265/5.64) we get 47 miles per gallon equivalent (MPGe). The DOE says that the miles/kg values are 49 combined, 48 in the city and 50 on the highway while Hyundai lists the official MPGe estimates as 50 combined, 49 city and 51 highway. The simple math gets us pretty close to these official numbers. Or take the 2014 Honda FCX Clarity. With a range of 231 miles and a max of 3.92 kg of hydrogen on board, division gets us to 59 MPGe. Officially, it's rated at 59 miles per kg (combined), with 58 in the city and 60 on the highway. In other words, simple math is a reliable way to calculate rough MPGe. So, we know that the Mirai can hold five kilograms of hydrogen on board and that the car has a 300-mile range. We don't even need a calculator to figure out that the Mirai is looking at 60 MPGe. Interestingly, that might be what the next-gen Prius will get.