2013 Toyota Tacoma X-runner V6 Access Cab 6speed 11k Mi Texas Direct Auto on 2040-cars

Auto blog

Toyota finds 10% MPG improvement in hybrid PCU

Keeping up its from-all-angles approach to efficiency, Toyota has found yet another way to eke out up to ten percent more precious MPGs in its hybrid vehicles, this time electronically. The automaker has announced the development of new silicon carbide (SiC) power semiconductors for use in power control units, which it will begin testing on Japanese roads within the next year. The PCU using the silicon carbide compound offers less electrical resistance, which improves efficiency when passing current between the battery and electric motor. It also loses less power after shutting off, and can operate at a higher frequency. The net power loss of the new PCU is just one-tenth of the current silicone-only version (the latter accounting for 20 percent of total electrical power loss in today's hybrids). The result, so far, is a claimed five-percent improvement in fuel economy in test vehicles, with the potential of ten percent by the time the new SiC power semiconductor comes to market. Additionally, the carbide wafers allow for smaller a power module, coil and capacitor, thus allowing the entire PCU to be 80 percent smaller (see the side-by-side comparison in the accompanying photo, which you can click to enlarge). We've got a while to wait before we start to see the carbide technology to start making a real-world impact. Toyota aims to begin using the SiC units in 2020. By then, with improvements in the company's other key efficiency factors - engine technology and aerodynamics - cars like the Prius will likely see significant gains in fuel economy. Read more in the press release below. Toyota Develops 'Diamond-like' Computer Chips to Boost Hybrid Mileage May 20, 2014 Toyota City, Japan – Toyota is using one of the hardest materials in nature after diamonds to develop a semiconductor chip it hopes will improve the fuel efficiency of its hybrids, such as the Prius, by as much at 10 percent. The company and its partners announced today that they have developed a silicon carbide (SiC) power semiconductor for use in automotive power control units. Toyota plans to begin test-driving vehicles with the technology on public roads in Japan within a year. The chips, made from carbide - one of the hardest materials in nature, theoretically have superior characteristics such as one-tenth the electrical power loss and 10 times the drive frequency. Toyota said the chips would also allow it to reduce the size of current automotive power control units by 80 percent.

Here's the 2017 Toyota 86: Don't call it a Scion

After we heard the bells toll for Scion yesterday, we told you that the Scion FR-S will transform into a Toyota. That's right: just a rebadging. The practical question is, which badge? The philosophical question, which we can't answer yet, is where it'll sit in the pantheon of front-engined, rear-drive Toyota sports cars, of which the Supra was the last one to visit our shores, from 1992 until 1998 in its fourth generation. And as if summoned by this conversation, this camouflaged prototype appeared. Our best guess is that this is going to be the US-bound, Toyota-badged version of the Subaru BRZ and all the other 86-badged variants: the Toyota 86 (in Asia, Australia, New Zealand, South America, and South Africa), Toyota GT86 (in Europe and New Zealand again), and Toyota FT86 (in Nicaragua and Jamaica). For simplicity's sake, let's call it a Toyota 86. Peer into the 86's swirly camo, and it looks like the car is going in for a light refresh. The lower intake in the front fascia, if it's representative of a production part, adopts a different shape and is considerably wider and narrower than either the BRZ or FR-S units. It also appears that the turn signal and its surround are reshaped, different than any of the current variants. Changes out back appear mild. The area around the license plate seems to be smoother, and there is likely a predictable light restyle of the bumper skin and defuser under the camo. We don't expect a significant power increase, and certainly not a turbocharger (sorry!), but crossing fingers wouldn't do any harm. Related Video:

Toyota mulling Cummins diesel for Tundra?

When Bloomberg spoke to Toyota USA Sales CEO Kazua Ohara recently, we highlighted his comments on the possible return of the Toyota Supra. However, the interview started with Ohara discussing the Tundra, and how it would take time to pinpoint and hone the pickup truck's brand image in the minds of consumers. That effort could get a boost, with a report in Edmunds saying that Toyota is "evaluating" the addition of a Cummins turbodiesel to the Tundra's engine options.
The Cummins powerplant is one of two options for the moment, the other being a hybrid powertrain. If the oil-burner got the thumbs-up, Toyota would follow the recent example of Nissan, which announced it would put a Cummins turbodiesel into its 2015 Titan. While the two Japanese companies make a closer comparison since they're both talking about Cummins applications in light-duty trucks, if it happens, it could be seen as further diluting the once-exclusive tie-up that Ram trucks has had with Cummins even though Ram has used Cummins in its heavy-duty truck.
Toyota hasn't said when it will decide on which direction to take, but either will be a move for the better in the view of segment watchers; PickupTrucks.com said the first of its top-five fixes for the Tundra would be a better engine, perhaps a diesel-electric hybrid from Toyota's Hino unit. Cummins told Edmunds it can supply a second manufacturer with the 5.0-liter diesel that Nissan will be using, so we wouldn't be surprised to see it end up in a Toyota or somewhere else.