2006 Toyota Tacoma Sr5 Offroad First Responder Lights Siren on 2040-cars

Auto blog

Toyota FT-86 Open Concept would make a mighty fine droptop FR-S

There's nothing wrong with going topless. And Toyota is proving that its FT-86 (read: Scion FR-S/Toyota GT86/Subaru BRZ) coupe is just as excellent with its roof removed. It may only be a concept, but this FT-86 Open previews a new droptop from the Japanese automaker to round out the Toyobaru sports car family. We're finally getting the chance to see the open-air FT-86 in person here at the Geneva Motor Show, and we're already yearning to take it canyon-carving.
Interestingly, the FT-86 retains the Toyota coupe's two-plus-two seating arrangement (we'd prefer a proper roadster setup here), but things still look good for this droptop two-door. We'll be curious to see how the car looks with its folding soft top in place (operated by fancy-shmancy electronics, by the way).
As for production intent, rumors have been flying about a production Scion FR-S convertible, but until we hear it directly from Toyota. Consider our hopes in check but our fingers crossed.

Heavily updated 2015 Toyota Camry to bow in New York

Looks like the new, "more emotional" Toyota Camry designer Kevin Hunter talked about back in January is going to arrive very soon, with news that Toyota's bread-and-butter sedan will be getting an update in just a few weeks time at the 2014 New York Auto Show.
"On April 16 at the New York International Auto Show, we will make an important announcement about America's best-selling car, the Toyota Camry," said Curt McAllister, Toyota product news manager, in an emailed statement. Considering the high-profile nature of the NYAS - not to mention the competition that will be shown there - it makes sense that Toyota would choose to unveil something as significant as a major refresh at the Javits Center.
We wish we had more to tell you than this, but unfortunately, that's about all we've got to go on at this time. Of course, we'll have much more for you during the lead up to NYAS, including any leaks of the refreshed Camry. Stay tuned.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.