2008 Toyota Sienna 6 Passenger, 5 Door Mini-van, 3.5l V6 Power on 2040-cars

Auto blog

2017 Toyota 86 Drivers' Notes | Fun, even with an automatic

The Toyota 86 is a car that enthusiasts begged Toyota to build for decades. It's small, lightweight and rear-wheel drive. Thanks to a partnership with Subaru that resulted in the BRZ, this stylish coupe hit the streets in 2012. In the U.S., the car was originally known as the Scion FR-S but was rebadged as a Toyota after Scion was axed last year. Along with a new name, the 86 received updated styling both inside and out as well as a revised suspension and a slight bump in power, at least for the manual models. This Hot Lava-colored car doesn't feature Toyota's slick six-speed manual. Instead it rocks a six-speed automatic with paddle shifters. While some enthusiasts may look down at that, automatics make up more than half of 86 sales. Still, the bones are there, and some people don't think the automatic is all that bad. Either way, we can't encourage enough people to buy these cars, as we want Toyota and Subaru to keep building them. Senior Editor, Green, John Beltz Snyder: When I first slid behind the wheel of the 86, I was surprised to see the gear selector and paddles. It's one of those cars that you don't think of as having anything but a manual transmission. Also, in an interior where all the controls and displays are underwhelming, a set of paddle shifters stands out as one of the few tactile objects in the cabin. I ended up using the paddles quite a bit, and found that I actually enjoyed using them, so much so that I'd actually consider opting for the automatic transmission were I to buy an 86. Despite shifts that aren't as razor sharp as they could be, the car's high-revving engine means that it still feels great to use. Riding an engine like this up to its redline, filling the cabin with noise, is the sort of thing that'll give you goosebumps. Being able to keep both hands on the wheel while shifting is a good thing for engagement in this car, based on my time with it. Plus, when I got stuck in traffic, I didn't have to wear out my left leg. The other brilliant thing about the Toyota 86 is its sense of balance. I loved the way it communicated its load distribution when cornering, whether on or off the throttle or brake. The fact that the nose of this car snaps right to where you want it when you start dialing in steering angle is satisfying. And its low stance and good view out the windshield make it really easy to place on the road.

Toyota investing $30 million in Indiana for more Highlander production

Indiana seems like the place to be if you're looking for work in a car factory. In May, Subaru announced plans to invest $400 million in its Lafayette, Indiana plant, creating 900 new jobs in the process and increasing capacity to 300,000 units per year. Now, Toyota has announced plans to invest $30 million in its Princeton, Indiana plant, 170 miles south of the Subaru factory, which also builds the Camry.
Toyota's investment will create an additional 200 jobs and increase the factory's volume by 15,000 units. Toyota announced an investment in the plant in February of 2012 that bumped volume up from 300,000 to 350,000 units. Toyota Motor Manufacturing Indiana, as the Princeton facility is officially known, produces the recently revised Toyota Highlander, the Sequoia and the Sienna. It employs 4,500 people, and this announcement represents Toyota's tenth production increase in under two years.
Scroll down below for the official announcement.

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017