2011 Toyota 4cyl 4wd on 2040-cars

Auto blog

Next-gen Toyota Tacoma mule caught towing in the desert

With the Chevrolet Colorado and GMC Canyon set to arrive in dealers in the near future, it's high time Toyota got to work on a replacement for the Tacoma, a vehicle whose present generation debuted in the middle of the Bush Administration. Now, we have images of that new pickup undergoing testing.
Our spy photographers picked up this heavily modified mule undergoing tow tests in the desert. It rides on a modified version of the current Taco's frame, as evidenced by shots of its undercarriage, although our spies cite the lack of riveted sections as indications that the current truck's footprint should remain unchanged.
Aside from underbody changes, this particular Tacoma featured a six-speed manual transmission, which we're expecting to be joined by a six-speed automatic. The current four- and five-speed autos found on the current truck will almost certainly be killed off. Marching to the grave with those slushboxes will be the two-door Regular Cab body style. Our spies are expecting Toyota to focus its efforts on the larger, more accessible Double Cab.

Toyota Camry re-earns CR 'Recommended' rating following crash tests

All is right again in the Toyota kingdom. The Japanese manufacturer's bread-and-butter sedan, the Camry, has been put back on Consumer Reports' "Recommended" vehicle list, following improved performance in the Insurance Institute for Highway Safety's crash testing.
You'll recall that the 2012 and 2013 Camry were infamously booted from the list due to "Poor" ratings in IIHS' notoriously tough small-overlap crash testing. Toyota vowed - just last week actually - to fix the ratings. As the Toyota brand's head, Bill Fay, said last week, "It's still a five-star car. It still does very well in all the IIHS tests. It did not in [the small overlap frontal crash test], and we're busy making the necessary adjustments so that we can address that."
Now, though, those redesigned cars have been tested, earning an "Acceptable" rating in the overlap testing. According to Consumer Reports, Camrys built from November 2013 on feature new internal structures that improve the car's crash test scores enough to make it a "Recommended" buy. IIHS has also elevated the car back to a position in its Top Safety Pick category, although it falls short of the new gold standard, the Top Safety Pick + rating.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.