2014 Toyota Prius V Two on 2040-cars

Auto blog

Toyota prices TRD Pro Tacoma, 4Runner

Toyota is finally all set to drop more details about the upcoming off-road ready TRD Pro Series models of the 4Runner, Tacoma and Tundra after first revealing them in February. These trucks and SUV might not get the big engine and other mods that desert-stormers like the Ford F-150 Raptor have, but they are still a nice step up over the stock versions. All of the TRD Pro vehicles come as 4x4 models with Bilstein shocks with remote reservoirs in the rear, TRD front springs, skid plates, black wheels, retro-inspired "TOYOTA" badging and TRD-branded floor mats and shift knobs on the inside. They're available in three colors: Inferno, Attitude Black Metallic and Super White.
The Tacoma hits the market first in early August with prices starting at $35,525, plus $885 for delivery, processing, and handling, for an Access Cab V6 with a six-speed manual. Opting for a five-speed automatic brings things up to $37,390 after the destination fee. A Double Cab with a manual goes for $37,320, or $38,300 for the automatic, after the delivery charges. The 4Runner follows in September with just a single trim priced at $41,110 - $41,995 after the charge - for the V6 and five-speed auto.
Toyota is holding off on revealing more about the Tundra for now. It's coming in the fall, but the company isn't announcing prices yet. We don't have to wait long, though. "Within the next month we'll reveal that," said Toyota spokesperson Sam Butto to Autoblog about the TRD Pro Tundra's price.

Audi outlasts rivals to win 13th Le Mans title

As is so often the case, the 2014 Le Mans was a war of attrition, and Audi managed to prevail once again after all 24 hours had been recorded in the history books, with its Audi R18 E-Tron Quattro claiming first and second places, followed by Toyota in third. Drivers Marcel Fassler, Andre Lotterer and Benoit Treluyer inherited the lead in their No. 2 Audi after the No. 7 Toyota, driven by pole-sitter Kazuki Nakajima, was forced to retire with electrical problems in the 15th hour.
The No. 2 Audi led the race until it was forced to the pits to replace a turbocharger in the 17th hour, allowing the No. 1 Audi, driven by Lucas di Grassi, Marc Gene (who was a last-minute replacement for Loic Duval, who crashed hard during practice) and defending champion Tom Kristensen, led the race until the 21st hour, when it too had to pit with turbocharger issues. This gave the No. 20 Porsche of Timo Bernhard, Brendon Hartley, and Mark Webber the lead until it was forced off the track with gearbox problems, eventually finishing in 38th position.
In LMP2, the Jota Sport Zytek Z11SN-Nissan driven by Simon Dolan, Harry Tincknell and Oliver Turvey claimed victory, the first five LMP2 finishers all powered by Nissan. Down a level in GTE-Pro, No. 51 AF Corse Ferrari 458 Italia GT2 driven by Gianmaria Bruni, Toni Vilander and Giancarlo Fisichella finished one lap ahead of the leading Corvette Racing C7.R. And finally, the No. 95 Aston Martin Racing Vantage GTE driven by Kristian Poulsen, David HeinemeierHansson and Nicki Thiim won the GTE-Am race two laps ahead of a Proton Porsche 911 GT3 RSR.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.