1989 Toyota Land Cruiser Fj62 4x4 All Original Ca Solid Fj At No Reserve - Video on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Recharge Wrap-up: Porsche Mission E charging for Tesla, net zero energy Toyota dealership

Porsche has confirmed that its Mission E charging infrastructure will also work with Tesla vehicles. The ultra-fast, 800-volt charging system will recharge the Mission E to 80 percent in about 15 minutes, and will also service new EVs from Volkswagen and Audi. Porsche CEO Oliver Blume told Top Gear that development of the charging infrastructure "sounds easy but getting the details agreed is hard. We already have the clear technical concept. It can even work with Teslas, with an adapter." Dieter Zetsche, Head of Mercedes-Benz, also tells Top Gear that they are "in talks" with Porsche regarding charging infrastructure. Read more at Top Gear, or from Electrek. An Oregon Toyota dealership is set to be the world's first net zero energy automotive dealership. The newly constructed, LEED Platinum certified Toyota of Corvallis produces more energy than it consumes, for which it is expected to receive Net Zero Energy certification. The 34,800-square-foot building is equipped with enough solar panels to produce as much energy that the dealership will use, with excess being put back into the grid, which will help during hours of peak demand. Toyota Motor Sales regional manager Steve Haag calls Toyota of Corvallis, "a first-of-its-kind template for the auto dealership of the future." Read more from Toyota. Valeo has introduced a new 48-volt hybrid system. The 48V e4Sport, as it is called, uses a 48-volt battery, electric starter-generator, electric supercharger, and eRAD electric rear axle drive for all-wheel drive. It maximizes regenerative braking and stores that energy for increasing torque with the starter-generator, and increasing acceleration with the electric supercharger. The system also supports all-electric driving modes. Valeo says the system is applicable across all vehicle segments, and works with both gasoline and diesel engines. Read more at Green Car Congress. PSA Group has created its own mobility solutions brand, called Free2Move. Free2Move will handle programs like car sharing, connected services, corporate fleet services, and affordable leasing programs for Peugeot, Citroen, DS, and other PSA partners. "For the PSA Group, mobility means not only making and selling excellent cars, but also offering a full range of mobility solutions," says PSA Group VP of Mobility Services Gregoire Olivier.

Toyota recalling 20k 2014 and 2015 cars and CUVs with 3.5L engines

Toyota has announced a recall of roughly 20,000 vehicles covering the 2014 Avalon, Camry, Highlander (pictured) and Sienna, as well as the 2015 Lexus RX luxury crossover. The affected vehicles are all powered the 2GR-FE engine, which in layman's terms, is Toyota's well-regarded 3.5-liter V6.
According to Toyota's statement, a parts supplier might not have welded "the end cap on the right-hand fuel delivery pipe in the engine compartment" correctly, meaning fuel could leak. Leaking fuel, of course, increases the chance of an engine fire. That said, no fires, crashes or injuries have been reported due to the issue.
Owners will be notified to report to dealers, where techs will check the fuel delivery pipe and fit a replacement part as necessary.