2008 Toyota Highlander Limited Navigation Sunroof Backup Camera on 2040-cars

Auto blog

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017

Toyota FCV Concept comes one step closer to reality

When Toyota first conceptualized a gasoline-electric hybrid vehicle for mainstream Americans to drive, the initial response was pretty skeptical. Still, through relentless engineering and solid product after solid product, Toyota has built the Prius brand into the dominant force in the hybrid car market.
Something like that plan of attack is what the Japanese company is preparing for hydrogen fuel cell vehicles, as well, and that attack is seeing a critical salvo fired today with the debut of this FCV Concept at the Tokyo Motor Show.
Though there's nothing substantive to be said about rumors of a 300-mile range or a sticker price around $50,000, the FCV concept does offer a few technical details. The sharp-beaked concept makes use of two high-pressure hydrogen tanks and boasts a power output density of three kilowatts per liter.

More head-up displays are coming to a dashboard near you

With the exception of Apple products — $1,000 for a freakin' smartphone? — one great thing about tech is you typically get more for your money with each passing year. This is particularly true with automotive tech: Features like driver assists and surround-view cameras that were once exclusively available in luxury vehicles now come standard even on some economy cars. The same thing is slowly happening with head-up displays (HUD). For example, the 10-inch HUD in the 2018 Toyota Camry is one of the largest and best HUDs I've seen in any car. And a big improvement on the much smaller HUD in the latest Toyota Prius. Mazda is another mainstream brand that offers HUDs in several of its vehicles. But instead of embedding expensive components in the dash and using a special windshield, the HUDs in the Mazda3 and Mazda6 use a thin plastic lens that folds down when not in use. MINI has a similar solution, but this low-cost approach has limits in terms of size and position of the images compared to traditional HUDs that use the windshield as a screen. We're also starting to see similar lens-based aftermarket options that can be added to any car. Last year I tested a portable HUD called Navdy that taps into a car's OBD-II port to provide info on speed and RPM and uses built-in GPS and Google Maps to show the surrounding area, display speed limits and route you to your destination. Navdy also connects to an Android or iOS smartphone via Bluetooth to display data from phone calls, texts and music playing on a connected device, and it's simple to use and easily visible in almost any lighting condition. While Navdy is still available online, late last year the company ran into financial difficulties, and product support has been halted. I recently tested a new portable HUD called Hudly that's not quite fully baked and falls short of Navdy because it doesn't tap into an OBD-II port. Since a companion smartphone app for Hudly isn't scheduled to launch until next month, for now it only mirrors what's on a smartphone. So it can be used for nav and other apps, and its features are very limited. Between automakers adding HUDs in more reasonably priced cars and the aftermarket filling in the gaps for existing vehicle owners with add-ons, the technology is becoming more prevalent and affordable. And it's also getting better.