2008 Highlander Hybrid Limited Awd! Nav Rear-cam 3rd-row Heated-seats 1-owner!! on 2040-cars

Auto blog

Jaguar solution to keyless start could save lives

UPDATED: An earlier version of this story indicated the Jaguar keyless start function was meant as a safety feature, when in fact, it is meant as a convenience one and will not work as described if automatic stop/start is not engaged. Today, The New York Times published an article about more than two dozen deaths related to drivers accidentally leaving their cars running, closing their garages and later succumbing to carbon monoxide that flooded their homes. The reason has been identified as "keyless start" features, or proximity entry and push-button start, where owners don't need to physically handle a key or fob to gain entry into the vehicle or start it. It is the latest, and deadliest, issue raised with this system after those related to security and simple inconvenience (for instance, leaving the car at a valet or car wash with the fob in your pocket). From my personal perspective, The New York Times had a rather harsh "evil carmakers" tone throughout the article. This is not a matter of a known faulty component, as with the GM ignition switch recall. This has as much to do with user error where people leave their car without pressing the "off" button and without noticing the engine is still running. About half of the cars in question are produced by Toyota and Lexus, brands that have offered keyless start longer than most. They are also brands with high rates of elderly owners, who seemingly made up a majority of reported deaths and injuries. One fire department in Florida even started a campaign alerting those in the area of the dangers of leaving your car running when it noticed a correlation between an increase in cars equipped with keyless start and calls related to carbon monoxide poisoning. I see several contributing issues at play, most of which go well beyond this particular issue. First is insufficient training of owners by dealers and/or owners not paying close enough attention during this training. Cars are complicated, but you should at least know how basic functions work. Second, woefully inadequate driver training in this country. Third, and with apologies to the AARP, insufficient testing of elderly drivers and/or insufficiently low standards for elderly drivers. If you don't know you have to shut the car off or cannot hear that an engine is running, perhaps you shouldn't be driving. Fourth, re-examining keyless start systems.

Is 120 miles just about perfect for EV range?

When it comes to battery-electric vehicles, our friend Brad Berman over at Plug In Cars says 40 miles makes all the difference in the world. That's the approximate difference in single-charge range between the battery-electric version of the Toyota RAV4 and the Nissan Leaf. It's also the difference between the appearance or disappearance of range anxiety. The 50-percent battery increase has zapped any lingering range anxiety, Berman writes. The RAV4 EV possesses a 40-kilowatt-hour pack, compared to the 24-kWh pack in the Leaf. After factoring in differences in size, weight and other issues, that means the compact SUV gets about 120 miles on a single charge in realistic driving conditions, compared to about 80 miles in the Leaf. "The 50 percent increase in battery size from Leaf to RAV has zapped any lingering range anxiety," Berman writes. His observations further feed the notion that drivers need substantial backup juice in order to feel comfortable driving EVs. Late last year, the Union of Concerned Scientists (UCS), along with the Consumers Union estimated that about 42 percent of US households could drive plug-in vehicles with "little or no change" in their driving habits, and that almost 70 percent of US commuters drive fewer than 60 miles per weekday. That would imply that a substantial swath of the country should be comfortable using a car like the Leaf as their daily driver - with first-quarter Leaf sales jumping 46 percent from a year before, more Americans certainly are. Still, the implication here is that EV sales will continue to be on the margins until an automaker steps up battery capabilities to 120 or so miles while keeping the price in the $30,000 range. Think that's a reasonable goal to shoot for?

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.