Corolla Le Automatic Bluetooth Ipod Connectivity on 2040-cars

Auto blog

Toyota and Lexus recall models for inadvertent airbag deployment

The Basics: Toyota will recall 320,000 examples in the US of the 2003-2006 Land Cruiser, 2004-2006 4Runner, 2005-2006 Tundra and Sequoia, 2003-2006 Lexus LX470, and 2004-2006 GX470. The Problem: The curtain shield airbags that come down from the roof can inadvertently deploy shortly after vehicle startup. This is due to improper programming of the airbag control module. Injuries/Deaths: "Toyota is not aware of any crashes caused by the condition. We have received reports alleging injuries such as abrasions and ringing in ears," company spokesperson Cindy Knight told Autoblog. The Fix: Toyota and Lexus dealers will replace the airbag control module with a new part, which will have improved programming. If You Own One: Toyota and Lexus will notify affected owners by mail early this month. Related Video: Toyota and Lexus Recall Certain Land Cruiser, 4Runner, Tundra, Sequoia, LX, and GX Vehicles February 02, 2016 TORRANCE, Calif., February 2, 2016 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 320,000 Model Year 2003-2006 Land Cruiser; 2004-2006 4Runner; 2005-2006 Tundra and Sequoia; 2003-2006 LX 470; and 2004-2006 GX 470 vehicles. The involved vehicles are equipped with side Curtain-Shield-Airbags (CSAs) which deploy from the roof in the event of certain types of crashes. Due to improper programming in the airbag control modules, there is a possibility that, under certain specific and limited conditions shortly after startup, the CSAs and seat belt pretensioners could activate when not necessary. Unexpected activation of the CSAs could increase the risk of injury to the occupant. All known owners of the involved vehicles will be notified by first class mail. Toyota and Lexus dealers will replace the airbag control module with one which has an improved programming at no cost to owners. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-to-date Safety Recall information on Lexus, Toyota and Scion customers should check their vehicle's status by visiting http://www.toyota.com/recall and entering the Vehicle Identification Number (VIN). Safety Recall inquiry by individual VIN is also available at the NHTSA site: safercar.gov/vin. For any additional questions, customer support is also available by calling Toyota Customer Service at 1-800-331-4331 or Lexus Customer Service at 1-800-255-3987.

Toyota Mirai might be the name of new fuel cell car; it means 'future'

Anybody remember the Ford Futura? It wasn't exactly a world-beater of a car, so we don't think the name Toyota's has apparently chosen for its first production fuel-cell vehicle is a tribute of sorts. Though one never knows. Maybe Toyota just likes 18-inch-tall EVs. The Japanese automaker has apparently settled on a nameplate for its fuel-cell model, and the name will be "Mirai," which means "future" in Japanese, Bloomberg News says, citing a person familiar with the process that it didn't identify. Bloomberg couldn't get anyone with Toyota to comment on record about the name – and neither could AutoblogGreen – but we do remember that Toyota has bandied this name about before, so we're not setting anything down in stone quite yet. Last month, Toyota said the new fuel cell car would debut in Japan next April and would be priced at about $69,000 before any sort of government incentives kicked in. The company hasn't revealed details about a US release date or pricing here, but indicated that US sales would start where there's already some semblance of a hydrogen-refueling infrastructure. That pretty much means California and nowhere else in the states. The fuel-cell model is said to have a full-tank range of about 435 miles and that the tank can be filled up in about three minutes, similar to a gas-powered vehicle. In other words, the future.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.