2004 Toyota Corolla Ce Sedan 4-door 1.8l on 2040-cars

Auto blog

NHTSA investigating 30,000 Toyota Camry Hybrids for brake assist problems

Older model Toyota Camry Hybrids are under investigation by the US National Highway Traffic Safety Administration (NHTSA) for potential braking problems. Enough complaints have poured into the NHTSA website that the agency is now taking a look at the problem, which could affect around 30,000 vehicles from the 2007 and 2008 model years. According to Reuters, 59 complaints have been submitted revolving around an "intermittent loss of assisted braking" which means the car takes longer to stop. Interestingly, the rate of complaints is increasing. Toyota is reportedly cooperating with NHTSA and there has not yet been an official recall on the Camry Hybrids. In 2006, Toyota said Brake Assist was "an electronic function that senses an emergency stop and applies increased braking power once the driver touches the brake pedal." When Toyota unveiled the 2007 Camry Hybrid, it proudly stated that the new Brake Assist function would be standard. Other Toyota hybrids have had problems with their brakes in the past, including the 2010 Prius and Lexus HS 250h hybrid. You can read some of the complaints about Brake Assist in the Camry Hybrids to the NHTSA here. People are saying that the "Check VSC" lights can come on before the brakes loose some of their power and a lot of them are being quoted repair costs of over $3,000 by Toyota dealers. Featured Gallery 2007 Toyota Camry Hybrid View 38 Photos News Source: Reuters Green Toyota Hybrid brakes

4th-gen Toyota Prius production delayed by 6 months

If you were holding off buying a new car in anticipation of the fourth-generation Toyota Prius arriving in 2015, your wait might be a little longer. Company insiders are claiming that production of the bestselling hybrid is being pushed back from spring to possibly as late as December 2015. Toyota is reportedly still making alterations to make sure everything is just right before it unleashes the all-important, efficient hatch on a waiting public.
According to unnamed sources speaking to Automotive News Europe, the main reasons for the delay aren't completely known. It's believed the engineers are still working on making the hybrid powertrain more efficient and improving the new Toyota Global Architecture modular platform. The insiders claim that the final production prototype of the Prius is still under development, and it might be November before it's finalized. From there, it usually takes around 12 months to tool up and for the first car to roll off the assembly line. It would be another year after that before the plug-in variant starts assembly. The national manager of Toyota Product Communications, Michael Kroll, told AutoblogGreen, "As you might expect, we can't comment on future product plans."
Despite the delay, some potential details have already emerged about the new hybrid. A company spokesperson recently told Autoblog via email that Toyota is engineering the next-gen Prius to have smaller, more power-dense electric motors and greater thermal efficiency. The new modular platform is also rumored reduce weight, and the changes could lead to a targeted 10 percent improvement in fuel economy.

Toyota R&D shows off free piston engine linear generator for future EVs

We often hear how an electric vehicle powertrain architecture allows vehicle designers much more freedom than a traditional ICE powertrain does. With differently shaped battery modules and small electric motors, there are lots of way to put the pieces together. With today's plug-in hybrid technology, engineers still need to put a decent-sized ICE somewhere, but new technology from Toyota could free up the gas-electric vehicle designers of the future. Presented at the recent SAE World Congress in Detroit, the idea from Toyota Central R&D Labs Inc. and involves what is called a Free Piston Engine Linear Generator (FPEG). Think of it as a sort of one-cylinder, two-stroke mini-engine that can work either as a generator (thank to magnets and a linear coil) or to directly drive a vehicle. The current prototype is a 10-kW unit that Toyota say would provide enough power to get a B- or C-segment electric vehicle up to highway speeds (75 miles per hour) when paired up to offer 20 kW. Pairing the FPEGs is also important to minimize vibrations. One system tested by Toyota had a 42 percent thermal efficiency, but the engineers are working to improve the overall efficiency even further. You can watch an animated video of the piston in action here (click on "Outline") and see the SAE papers here and here. More technical details are available at Green Car Congress. News Source: Toyota Labs via Green Car CongressTip: Thanks, Joe V. Green Misc. Auto Shows Toyota Technology Emerging Technologies Electric generator