1997 Toyota Corolla Dx on 2040-cars

Auto blog

Customers want wireless charging in next-gen Prius Plug-In; they might get it

Could 2016 be the year prospective Toyota Prius Plug-in Hybrid buyers are waiting for? Why, yes, says an unidentified Toyota spokesman. That's according to Plug-in Cars, which reports that a wireless plug-in vehicle charging system may be less than two years away for the Prius Plug-in. WiTricity has, for a few years, been developing its magnetic resonance wireless charging system for the model. This type of system allows for more distance leeway than other wireless setups when it comes to how close the car and its on-board receiver need to be to the floor-mounted system. That allows for smaller, lighter on-board receivers, which is key for any plug-in vehicle. Toyota spokeswoman Jana Hartline confirmed in an e-mail to AutoblogGreen that the company has conducted wireless charging tests in Japan "with hopes to bring that technology to market in the near future" but declined to provide more detail on the company's plans to offer wireless charging for plug-ins. Toyota's Satoshi Ogiso said last summer that the Prius Plug-in would eventually offer a wireless charging system in response to prospective customers' demand for it, though he wasn't specific on a time frame. Toyota started discussions with WiTricity regarding wireless charging system development more than three years ago and said late last year that it had reached a licensing agreement with the Boston-based company. WiTricity has also worked on developing wireless-charging systems that are compatible with Audi and Mitsubishi vehicles. WiTricity grew out of MIT back in 2007, back when we could barely imagine how it would work.

Recharge Wrap-up: Ford Fusion and Toyota Highlander named Best Hybrids for Families; Funky Prius motorhome

Tesla Model S customers in China will receive a "Universal Mobile Charger" with their vehicle. The charger will allow drivers to charge their Tesla anywhere, without having to search out a Supercharger when out in the wild. It allows Model S drivers a bit more freedom and helps alleviate worries about traveling too far from home. It could also help sway potential customers who suffer from range anxiety. The charger will be free to new and existing customers when it becomes available this summer. Read more at Car News China. US News & World Reports' list of Best Cars for Families includes two hybrids. The 2015 Ford Fusion Hybrid was chosen as the Best Hybrid Car for Families, while the 2015 Toyota Highlander Hybrid was picked as the Best Hybrid SUV for Families. The Fusion hybrid was chosen for its roomy, comfortable cabin, as well as the MyKey system's features for new drivers. The Highlander Hybrid offers eight seats - good for carpooling - as well as good mileage and a quality infotainment system. Read more at US News & World Reports or at Hybrid Cars. Audi plans to give its electric vehicles looks that differentiate them from the rest of the lineup. "In early 2018, we will launch a battery-powered sports activity vehicle in the large premium segment with a range of more than 500 kilometers," says Audi's head of development, Ulrich Hackenberg. "It will have a new, very attractive design, which we are developing especially for the E-Tron range and for battery-electric vehicles." According to analysts, part of the reason the Toyota Prius was so successful was because it was easy to distinguish from other Toyota models with conventional powertrains. Read more at Automotive News Europe. An Australian man turned his Toyota Prius into a miniature motorhome. James Lawler used mostly scraps to build the tiny house – complete with tin roof, chimney, and stained glass window – for just $150 Australian. It took him about a week to finish. Lawler made use of his creation at the Meredith Music Festival so he didn't have to sleep in a tent. He was, however, fined by police for driving the makeshift motorhome. See pictures and read more at the Herald Sun.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.