5,000 Miles Warranty 2 Door Black Power Equipped Automatic Sunroof A/c on 2040-cars

Auto blog

Recharge Wrap-up: TRD Toyota Prius, new Hyundai Tucson Fuel Cell dealer

A new study predicts that biofuels capacity will grow to 61 billion gallons per year by 2018. The findings from Lux Research also suggest that biodiesel and ethanol will make up 96 percent (about 5.76 billion gallons) of that. Sixty-four percent of biofuels will come from the Americas, led by the US and Brazil, but with Colombia and Argentina emerging as important producers. Other large emerging producers are China, Indonesia, and Thailand in Asia, and Portugal, Poland, and France in Europe. A large share of next-generation biofuels are expected to come from waste oils. Read more at Domestic Fuel. Images of Toyota Racing Development equipment for the 2016 Prius have leaked. The images show what are likely cosmetic upgrades for the JDM version of the hybrid, including a rear spoiler, front spoiler lip, extended side skirts and a selection of wheels ranging from 15 to 18 inches. Also shown are LED daytime running lights and a dual-tip, centrally mounted exhaust. Expect to see the official reveal of the TRD Prius at the Tokyo Motor Show, where there will surely be more details about the add-ons, including the possibility of some interior features. See the leaked images and read more at Motor1. A fourth Hyundai dealer in southern California now sells the Tucson Fuel Cell. Keyes Hyundai in northern Los Angeles has met the requirements to sell the hydrogen-powered CUV. So far, Hyundai has delivered more than 75 Tucson Fuel Cell vehicles, which have logged almost 700,000 miles on southern California roads. "Keyes Hyundai is thrilled to be added as a qualified dealer for Hyundai's zero-emissions Tucson Fuel Cell hydrogen electric vehicle," says David Kohan, the dealership's general manager. "Our location in the northern Los Angeles region makes it even more convenient for local residents to conveniently acquire their new Tucson Fuel Cell CUV, helping reduce greenhouse gas emissions." The other qualified dealerships are located in Anaheim, Carson and Tustin. Read more in the press release below. Keyes Hyundai In Los Angeles Added To Growing Collection Of Hyundai Tucson Fuel Cell Dealers Keyes Hyundai Joins Tustin Hyundai, Win Hyundai in Carson and Hardin Hyundai in Anaheim as a Qualified Hydrogen Fuel Cell Dealer LOS ANGELES, Sept. 22, 2015 /PRNewswire/ -- Keyes Hyundai in Los Angeles became the fourth qualified dealer for Hyundai's zero-emissions Tucson Fuel Cell hydrogen electric vehicle today. Hyundai is the only manufacturer in the U.S.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota finds 10% MPG improvement in hybrid PCU

Keeping up its from-all-angles approach to efficiency, Toyota has found yet another way to eke out up to ten percent more precious MPGs in its hybrid vehicles, this time electronically. The automaker has announced the development of new silicon carbide (SiC) power semiconductors for use in power control units, which it will begin testing on Japanese roads within the next year. The PCU using the silicon carbide compound offers less electrical resistance, which improves efficiency when passing current between the battery and electric motor. It also loses less power after shutting off, and can operate at a higher frequency. The net power loss of the new PCU is just one-tenth of the current silicone-only version (the latter accounting for 20 percent of total electrical power loss in today's hybrids). The result, so far, is a claimed five-percent improvement in fuel economy in test vehicles, with the potential of ten percent by the time the new SiC power semiconductor comes to market. Additionally, the carbide wafers allow for smaller a power module, coil and capacitor, thus allowing the entire PCU to be 80 percent smaller (see the side-by-side comparison in the accompanying photo, which you can click to enlarge). We've got a while to wait before we start to see the carbide technology to start making a real-world impact. Toyota aims to begin using the SiC units in 2020. By then, with improvements in the company's other key efficiency factors - engine technology and aerodynamics - cars like the Prius will likely see significant gains in fuel economy. Read more in the press release below. Toyota Develops 'Diamond-like' Computer Chips to Boost Hybrid Mileage May 20, 2014 Toyota City, Japan – Toyota is using one of the hardest materials in nature after diamonds to develop a semiconductor chip it hopes will improve the fuel efficiency of its hybrids, such as the Prius, by as much at 10 percent. The company and its partners announced today that they have developed a silicon carbide (SiC) power semiconductor for use in automotive power control units. Toyota plans to begin test-driving vehicles with the technology on public roads in Japan within a year. The chips, made from carbide - one of the hardest materials in nature, theoretically have superior characteristics such as one-tenth the electrical power loss and 10 times the drive frequency. Toyota said the chips would also allow it to reduce the size of current automotive power control units by 80 percent.