2024 Toyota Camry Le on 2040-cars

Auto blog

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.

Toyota GT86 14R-60 shows how to do lightweight at a steep price

Toyota is finally making good on its Griffon concept from last year with this limited-edition 14R-60 that basically hops through the Toyota Racing Development catalog to imagine the ultimate lightweight GT86 (the continental relative to the Scion FR-S/Subaru BR-Z). Unfortunately, it's not coming stateside, and even if this modded Toyobaru were coming here, you might not want to pay the rather steep price.
Like the concept, the 2.0-liter boxer engine still makes the same 197 horsepower and 151 pound-feet of torque. However, the drivetrain isn't entirely untouched thanks to a new air filter, engine oil cooler, a reinforced clutch, lightweight flywheel, and mechanical limited-slip differential from TRD. The six-speed transmission is also tweaked, with different gearing in first and second and an altered final drive ratio.
To keep things planted the suspension gets a new coilovers, a V-shaped tower brace in the front and another in the rear. Improved deceleration comes thanks to upgraded brakes. There also are even more goodies on the outside, including a complete body kit that includes a carbon-fiber roof and massive rear spoiler. The stock wheels are replaced with 18-inch forged magnesium units, as well.

Automakers' sound systems: Crank it, don't yank it

Years ago, one of the first things most music lovers did after buying a new vehicle was drive to an aftermarket stereo shop to get the crappy stock components swapped for better gear. And you'd typically get not only better sound but also more bang (and boom) for your buck. But in the past decade or so, the overall quality of OEM audio has dramatically increased, while car electronics became more complex, removing the incentive for most new vehicle owners — and all but the most hardcore DIYer — to start from scratch. In 2010, I did a comparison of the average costs for OEM electronics vs. similar offerings from the aftermarket, and back then automakers' stock premium systems were by far the best bargain — and are probably an even better value now. The premium 14-speaker, 1,200-watt JBL system in the all-new 2019 Toyota Avalon is a prime example of this trend. It's standard on the top two Limited and Touring trims and is available as a $680 audio upgrade on the XLE and XSE. I doubt you can even buy 14 speakers and 1,200 watts of amplification from the aftermarket for 700 bucks, much less have it all installed. And because the system is bundled with Toyota's Entune infotainment system, Apple CarPlay and a surround-view camera, removing the head unit means you would likely lose these features. Another advantage of OEMs and their audio partners is they can design the car around the audio system. In the past, automakers would typically place speakers where convenient for packaging, not for optimal sound reproduction, and audio engineers were forced to compromise. But as with the Avalon's premium JBL audio system, this is starting to change. At a recent behind-the-scenes peek for media into the process of developing the system, Toyota and Harman engineers delved into the minutia of sealing the inner panel of the front doors to create an enclosure for 6x8-inch woofers, making space in the pillars for JBL horn tweeters and extensively measuring the acoustic properties of the interior to tune the sound to the space. I'm met some creative and skilled car stereo installers, but none with a degree in psychoacoustics. The system is also the first to feature Quantum Logic Surround that creates a multi-channel listening experience from two-channel sources. And it includes Harman's Clari-Fi processing that "rebuilds key details lost" in compressed audio formats used by streaming music services and MP3s.