2012 Toyota Camry Xle Sedan 4-door 2.5l on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Toyota recalling 11,200 Scion iQ models over faulty passenger sensors

Toyota has announced a voluntary recall of 11,200 Scion iQ models from the 2012 and 2013 model years. According to the manufacturer, the problem with these pint-sized hatchbacks concerns the front passenger Occupant Classification System (OCS) weight sensor cables.
The OCS sensors in the front passenger seat control the operation of things like the airbags and seatbelt pre-tensioner. In these affected models, the cables for these sensors located in the seat track can become damaged as the passenger seat slides forward and backward. And if the cables are damaged, the airbags and seatbelt pre-tensioner may not function properly.
No injuries or crashes have been reported in conjunction with this issue.

Toyota recalls power window switches for 6.5 million vehicles [UPDATE]

UPDATE: There was one incident of someone in the US getting a burn to the hand from this issue Toyota spokesperson Cindy Knight tells Autoblog that. "We have 11 reports where part of the door trim and/or switch was burnt," she said. The company isn't aware of any crashes from the problem, though. Because of a potential short circuit in the driver's side power window switch, Toyota is recalling 6.5 million vehicles worldwide, Reuters reports. Of those, the automaker says around 2 million are in the US. The affected models here are: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD According to Toyota, the switch might not have received adequate lubricant grease during manufacturing, and over time this could lead to a short circuit. In a worst-case scenario, the part might even overheat, melt and cause a fire. As a fix, dealers will inspect the component on these vehicles and apply heat-resistant grease to it, and any broken examples will have an internal circuit board replaced. Toyota already issued one recall for this problem in 2012 when it had to repair 7.5 million vehicles globally from the 2007-2009 model years, including 2.5 million in the US. These latest models had the grease applied in a different way. Related Video: Toyota Recalls Certain Vehicles for Power Window Master Switch October 21, 2015 TORRANCE, Calif., Oct. 20, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 2,000,000 vehicles related to the driver's side Power Window Master Switch. The involved vehicles include certain: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD The Power Window Master Switch in the involved vehicles may have been manufactured with insufficient lubricant grease. If not enough grease is applied, under certain conditions the switch may develop a short circuit that can cause the switch assembly to overheat and melt. A melting switch can produce smoke and potentially lead to a fire. Toyota previously recalled certain 2007-2009 model year vehicles for a similar condition.