2012 Toyota Camry Xle on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Toyota Yaris Hybrid-R zips in on its way to Frankfurt

Toyota has been known to make some exciting cars over the years, but its hybrids, well... let's just say a Prius appeals to a different kind of buyer. The TS030 Hybrid LMP1, on the other hand, now that's more our speed. And at the Frankfurt Motor Show next week, the Japanese industrial giant will bridge the gap with the concept car you see here. Previewed in bits and pieces along the way, Toyota has now revealed the full details and array of photos of its new Yaris Hybrid-R concept. And what the full picture reveals is a Prius C that's gone to the gym - or more appropriately, the track.
Powering this little pocket rocket is TMG's Global Racing Engine: a 1.6-liter inline-four with direct injection and a Garett turbocharger to drive 300 horsepower to the front wheels through a six-speed sequential gearbox. A pair of electric motors provide an extra 60 hp to each of the rear wheels for a combined output of 420 hp and through-the-road all-wheel drive. A third 60hp electric motor serves as traction control under acceleration and acts as a generator under braking to feed the TS030-derived super capacitor that boasts a higher power density and faster charge/discharge speed than a traditional battery. The system can provide a 40-horse boost for ten seconds in Road mode, or the full 120hp for five seconds in Track mode.
Though based on the three-door Yaris, there'd be no mistaking this for any ordinary econo-hatch. 18-inch TRD alloys with Michelin Pilot Sport Cup tires pack the wheel wells and a wider grille dominates the front fascia, while black and blue trim contrast sharply with the white bodywork. The rear pillar incorporates a quick-fill competition-spec fuel cap, LED daytime running lights illuminate the way and oversized brakes keep it all under control. The interior boasts Recaro racing buckets in black leather and blue Alcantara. There's more to digest in the press release below, but the bottom line is that if this is where Toyota is taking its hybrids, we want to climb into the driver's seat, and we're looking forward to seeing the concept in the flesh next week.

Automotive Grade Linux will be the backbone of your connected car

Creating a backend for a secure, reliable, and expandable infotainment system is costly and time consuming. The Linux Foundation, a non-profit organization, has set out to promote and advance the Linux operating system in commercial products. Automotive Grade Linux, or AGL, is a group within the Foundation that seeks to apply a Linux backend to a number of automotive applications in a variety of vehicles from various suppliers and manufacturers. AGL's goal is to create a common, unifying framework that allows developers and manufacturers to easily implement applications across platforms. Currently, the focus is on infotainment systems, but AGL has plans for instrument clusters, heads-up displays, and eventually active safety software. At CES, a display from Panasonic showed a completely digital and customizable dashboard that allows information and apps to be moved from the gauge cluster to the infotainment screen and back, all through the use of gesture and touch controls. Although the organization has been around for five years, it's really only been in the past three that the group has been working hand in hand with automakers and suppliers. The first two OEMs to participate, Toyota and Jaguar Land Rover, have since been joined by Mazda, Suzuki, Ford, and, as of this week, Daimler. The latter is important as until now most of AGL's partner's have been based in Japan or the US. Other partners include suppliers Denso, Renesas, Continental, Qualcomm, and Intel. AGL want's to supply roughly 80 percent of the backend, allowing partners to then finish and refine the Linux system for each individual application. Think of how the Android operating system is refined and customized for individual smartphones from Samsung, LG, and Motorola. While the final product looks different, developers can have an application that will work across all AGL systems. Because it is open source, anyone can use and develop for AGL. You can even go onto the group's website and download a copy right now. There is also a software development kit available that helps facilitate app creation on the platform. Vehicle development cycles take roughly five years, so there currently are no cars that run an AGL backbone available for consumers. AGL Executive Director Dan Cauchy says products should be hitting the market later this year, with even more coming in 2018. Right now, the industry is relatively fragmented when it comes to infotainment and related systems.