Toyota 4runner 1988 Sale on 2040-cars

Auto blog

Recharge Wrap-up: Toyota allowed to inspect own hydrogen tanks, Telsa tour reveals expansion

Japan's Ministry of Economy, Trade and Ministry has certified Toyota to self-inspect its high-pressure hydrogen tanks. The approval allows more freedom in production timing, as outside inspectors previously had to be on site during the manufacture of hydrogen tanks for vehicle prototypes. Toyota has passed the stringent standards to become a registered manufacturer of the 700-bar hydrogen tanks, which the company will use in its upcoming fuel cell vehicle (FCV). With the improved efficiency this certification allows in the manufacturing process, Toyota believes it will help to lower the cost of the FCV. Read more in the press release below. A look inside Telsa's fremont Factory shows thriving activity and increased capacity. Analyst Trip Chowdhry, in a rare tour of the factory, describes a bustling facility capable of producing the Model X and Model III alongside the Model S. A part of the floor labeled "Driver Assist" suggests to Teslarati that Tesla is researching a self-driving car. Chowdhry reports that the factory lobby was "busy with European suppliers and Asian suppliers." He also found an energized workforce and culture similar to Silicon Valley startups. Read more at International Business Times. Mahindra has introduced a premium version of the e2o electric car, made in partnership with Reva. The car features a range of almost 75 miles, power steering, infotainment, rear-view parking camera, driver information display and an emergency power reserve feature, called REVive, offering an extra five miles of range activated through a smartphone. Mahindra also launched a program called "Goodbye Fuel, Hello Electric" in which customers pay to use the e2o by the mile. Learn more at The Indian Express. Toyota Approved to Self-inspect and Manufacture Hydrogen Tanks for FCVs Toyota City, Japan, August 29, 2014-Toyota Motor Corporation has received approval from Japan's Ministry of Economy, Trade and Industry (METI) to self-inspect and manufacture high-pressure hydrogen tanks for fuel cell vehicles (FCVs). This makes Toyota the first company to become a registered manufacturer of 70 MPa (700 bar) hydrogen tanks under Japan's High Pressure Gas Safety Act, revised in 1997 by METI. Toyota will now be able to increase the efficiency of the process of manufacturing safe high-pressure hydrogen tanks that ensure customer confidence.

Five automakers now being investigated by NHTSA for airbag woes

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.