14 Trail V6 Hood Scoop 4x4 Gps Navigation Heated Leather Backup Camera on 2040-cars

Auto blog

Chrysler, Nissan minivans earn 'dire' crash test results, says IIHS [w/video]

First introduced in 2012, the Insurance Institute for Highway Safety's small-overlap frontal crash test has become the bane of many auto engineers' existence. It's a particularly steep design challenge because it forces just 25 percent of a vehicle's front end to take the brunt of a 40-mile-per-hour impact. The newly released results of four family-minded minivans underscore just how difficult the crash test is: only one scored an Acceptable rating, and the other three did very poorly. The 2008-2015 Chrysler Town & Country and Dodge Grand Caravan, plus the 2011-2015 Nissan Quest, all received Poor ratings in the test, the IIHS' lowest possible score. The three of them showed significant crash intrusion into the driver's area. The dummy in the Nissan actually had to be cut out of the vehicle, with an IIHS spokesperson remarking, "the structure collapsed like a house of cards." In the Fiat Chrysler Automobile vans, the steering wheels moved out of the way, making the airbag less effective and letting the driver's head hit the dashboard. While it was not actually crashed, the agency is also giving the 2009-12 Volkswagen Routan a Poor score because it shares a structure with the FCA models. The newly released results of four minivans underscore just how difficult the small-offset crash test is. The refreshed 2015 Toyota Sienna (shown), conversely, earned an Acceptable rating and is also a Top Safety Pick+ because of its optional forward collision warning and automatic braking system. While the crash test dummy moved around during the impact more than the agency would have liked, sensors showed a low risk of injuries. The IIHS tested the Honda Odyssey last year, and it earned a Good overall score, the agency's best ranking. It's also a Top Safety Pick+ vehicle. The only member of the minivan segment left to test is the latest Kia Sedona, and the Institute is reportedly waiting a little longer for Kia to make changes to improve the model's performance. When reached for comment, Nissan spokesperson Steve Yaeger provided Autoblog with the following statement: "Nissan is committed to vehicle safety and believes that consumers should have information about crash protection so they can make educated buying decisions. Nissan is proud of the 2014 Quest's "good" rating in the IIHS front moderate overlap and side impact tests as well as a "good" head restraint rating.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.

At least 15 states jockeying for Toyota and Mazda factory jobs

Just a few weeks ago, Mazda and Toyota announced a partnership that would lead to an all-new $1.6 billion plant here in the United States. The plant will build EVs and is expected to employ roughly 4,000 people directly while creating thousands of indirect jobs through suppliers, shipping and more. The Detroit Free Press reports that as many as 15 Midwestern and Southern states are understandably interested in striking a deal with the automakers. Most of the states already have ties to the auto industry. While the Midwest has traditionally been home to auto manufacturing in the United States, in the past 25 years or so, the South has made a big push, offering tax incentives and a union-free workforce. Alabama alone is home to facilities from Honda, Hyundai, Mercedes-Benz and Toyota. Others house a burgeoning tech or manufacturing industry ripe for the picking. Freep breaks down the pros and cons for each state, with much of the focus being on supply chains and a reliable and plentiful workforce. The latter is of particular concern in states like Alabama and Michigan that already have a big auto industry. Toyota may feel those areas have already been tapped for talent. Most of the states are along or adjacent to Interstate 75 and its extended roots, so others like Texas and Iowa will have to fight hard if they want this facility. It's only been a few weeks, though. With manufacturing jobs in such great demand and elected officials eager to show they're seeking them for their states, it wouldn't be surprising if a few more joined the fray. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Detroit Free Press Green Plants/Manufacturing Mazda Toyota