09 Subaru Tribeca Navigation Backup Camera Heated Seats Leather Tpms Sunroof Abs on 2040-cars

Auto blog

Subaru puts Japanese production on pause in the wake of deadly typhoon

Subaru idled its main factory in Gunma, Japan, in the wake of the deadly typhoon that wreaked havoc on the eastern part of the country. The shutdown is tentatively scheduled to last about a week. Located roughly two hours northwest of Tokyo, the Gunma factory fell silent at the end of the morning shift on October 16, according to Automotive News. The facility wasn't directly affected by the typhoon, but some of its suppliers suffered flood damage. "These suppliers are currently working to normalize their operations with our human and material support as well, but we expect some impairment of their supply of automotive components and parts to Subaru," the firm said in a statement. It didn't name the suppliers, and it didn't identify the parts they make, but it added production should resume on October 25. About 2,500 cars leave the Gunma factory daily, Automotive News learned, so approximately 11,250 vehicles will be delayed by the shutdown.The BRZ, Forester, Crosstrek, and the WRX all come from the facility. It also makes the Impreza, though American-spec models are built in Indiana, and the Levorg, which isn't sold in the United States. Subaru confirmed to Autoblog its plant in Lafayette isn't affected by the storm, which suggests it sources parts from other suppliers. Subaru is the first car manufacturer to idle a factory in the wake of typhoon Hagibis, which killed 77 people when it touched down on October 12, but it might not be last. Suppliers normally work with several carmakers, and Toyota and Mitsubishi are reportedly keeping a very close eye on their parts inventory. Auto News Plants/Manufacturing Subaru

Subaru WRX STI S209 brings wider body, 341 hp, gold wheels to Detroit

With the Subaru WRX STI S209, "S" finally comes to the United States. Subaru Tecnica International created the S201 in 2000, but this ninth take on the theme — inspired by the class-winning WRX STI Nurburgring Challenge racer — is the first to make it our way. Unlike the last special edition we got here, the Type RA, this one comes with a notable power boost: 341 horsepower instead of the 310 ponies in the regular WRX STI. The muscle comes courtesy of a larger compressor and turbine in the HKS turbocharger, and 1.8 pounds more boost pressure. Since the S209 is the most powerful in-house model STI has ever built, the tuning arm didn't stop there. The EJ25 boxer gets air from a new intake duct, induction box with conical air filter, and a silicone turbo inlet duct. Paddles on the steering wheel control a system that sprays water on the intercooler to reduce air temperature, a feature last seen on the WRX STI from the 2004 to 2007 model years. An old-fashioned six-speed manual controls the transmission.The engine gets its fuel from a high-flow fuel pump that feeds larger injectors. Torque hasn't changed from 290 pound-feet, but there's 10 percent more torque at 3,600 rpm. Airflow through the mufflers is 17 percent freer. The cans also are 4.1 pounds lighter and terminate in four-inch pipes. Subaru makes no mention of any other S209 weight loss, but the looks and the "focus on high-performance driving" should make themselves known. STI widened the front and rear track by 0.6 inches, and punched out fenders with aero-aiding canards make the car 1.7 inches wider. The roof and rear wing are made of carbon fiber. Instead of the 245/35 R19 wheels on the series WRX STI, the S209's forged BBS alloys wear 265/35 Dunlop GT600A summer tires, which we're told can handle max lateral grip beyond 1 G. Behind those wheels, six-piston monoblock Brembo calipers with high-friction pads clamp cross-drilled steel rotors in front, two-piston monoblock calipers in back. Stiffer coil springs wrap retuned Bilstein dampers, the suspension aided in its work by reinforced front crossmember and rear subframe, a longitudinally-flexible strut tower bar in front, flexible draw stiffeners front and back, and a 20-millimeter rear stabilizer bar. STI programmers recalibrated the SI-Drive system's three driving modes: Intelligent, Sport, and Sport Sharp.

Subaru confirms 3-row crossover for Indiana plant for 2018

There's a new vehicle coming to Subaru's Lafayette, IN, factory, as the all-wheel-drive specialist confirmed the site will build a new three-row crossover. The vehicle, which will actually be larger than the long-departed, three-row Tribeca, will begin construction in 2018. This announcement from Subaru follows a report from Automotive News last week that the company would introduce a US-specific seven-passenger CUV. That same report pointed to the Indiana factory as the source of the new model. It's unclear if this new model will revive the Tribeca name. All the company would say is that it "will likely carry a name synonymous with outdoor adventure, consistent with the company's other successful crossovers." "We are delighted to be bringing even more Subaru manufacturing to the US," Subaru of Indiana Automotive executive vice president Tom Easterday said in a statement. "The new model will also result in increased investment at SIA and at several of our suppliers across the country." Alongside the unnamed new CUV, Subaru's Lafayette, IN, factory already builds the Legacy and Outback. By the time the full-sizer arrives, the factory will also be responsible for the redesigned Impreza. Read on for the official announcement from Subaru. November 9, 2015 SUBARU CONFIRMS NEW 3-ROW CROSSOVER TO BE MADE IN U.S. AT INDIANA PRODUCTION PLANT Subaru of Indiana Automotive will receive 3-row in 2018 as its fourth model Cherry Hill, N.J. - Subaru has confirmed that a new 3-row crossover model, effectively replacing the retired Tribeca, will be produced at its SIA plant in Lafayette, Indiana. The all-new crossover is expected to be built beginning in 2018 and will be a larger vehicle than the Tribeca, with full third-row capability. The new vehicle has not yet been named, but will likely carry a name synonymous with outdoor adventure, consistent with the company's other successful crossovers; Outback, Forester and Crosstrek. When production of the new model begins, Subaru will have four models produced in the U.S.: Legacy, Outback, a new Impreza compact sedan and 5-door model beginning production in late 2016, and this new crossover. Subaru production in Indiana is projected to be approximately 228,000 units in 2015, and annual capacity is scheduled to grow to 394,000 with the introduction of the Impreza model. Subaru is currently enjoying its seventh consecutive year of sales records and expects to close 2015 with over 550,000 sales, with sales tripling since 2007.