2009 Saturn Vue Xe on 2040-cars

Auto blog

A chopped-up General Motors EV1 shell sold for $23,662

Despite not having a VIN, a powertrain, a frame, or any doors, a decrepit General Motors EV1 shell recently sold for $23,662.10 on govdeals.com. Sold by the University of Cincinnati, the car — or what remains of it — is headed to an electric vehicle collection called The Beata Electric Motor Carriage Collection. Technically, the GM EV1 was the first mass-produced and purposed-built electric car in America. When it was released in 1996 for the 1997 model year, however, GM strictly leased the car as part of a "real-world engineering evaluation." The limited production run was meant to test real life with an EV and judge the interest from the public. GM only built 1,117 units, all of which were recalled, and most of them ultimately were sent to the crusher. But a select few were stripped of their powertrains and donated to universities and museums for educational purposes. One of those non-functioning cars made it to the University of Cincinnati in 2008. The post says it "has been in storage since," but it's not clear if the car sat in storage untouched or was stored and used by the university. According to EpiclyEpicEthan1, who posted the sales listing to r/cars, the car was purchased by The Beata Electric Motor Carriage Collection in Colorado. The Beata (derived from the Latin word for blessed) collection is a gathering of '90s OEM electric vehicles and a general EV hub. The website says the vehicles are used for testing, diagnostics, education, events, and overall preservation and documentation. The rare and niche collection also includes a 1993 Dodge/Chrysler TEVan, a 1997 Honda EV Plus, a 1999 Dodge/Chrysler EPIC EV, a 1998 Ford Ranger EV, a 2002 Toyota RAV4 EV LongRanger III, a Tesla Roadster, a 1998 Nissan Altra EV, a 1998 Chevrolet S-10 EV, a 2011 Nissan Leaf, and a 2012 Tesla Model S. Beata also has several other projects under construction such as the 2000 Toyota RXT-G Prototype, a 1997 RAV4 coupe EV prototype, the 1995 AC Propulsion eCivic EV, a 1995 ACP RXT-G Prototype LongRanger II, a 1995 ACP RXT-G Prototype LongRanger I, and a GM EV1. Beata acts as a resource for EV1 owners and helps place parts it finds and doesn't need. The parts it does need are put into building a working EV1. Beata's current EV1, which is 80 percent complete, is made up from more than 50 different parts sources, including from all three versions of the EV1, the 1994 LPF4 PreView "Impact" series, the 1997 EV1, and the 1999 EV1.

GM recalling another 2.7 million vehicles in five separate campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles.
The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles - some of them the same models - but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago.
The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents.

Lutz dishes dirt on GM in latest Autoline Detroit

Bob Lutz sits down for Autoline Detroit - Click above to watch video after the jump
Autoline Detroit recently played host to Bob Lutz, and, as is always the case, the former General Motors vice chairman dished out some great commentary. Lutz was promoting his new book Car Guys vs. Bean Counters: The Battle for the Soul of American Business, and talk quickly turned to his role as it related to product development and high-level decision making at GM. While on the topic of brand management, Lutz revealed a few rather interesting tidbits about his former employer:
All Chevrolet vehicles were required to have five-spoke aluminum wheels and a chrome band up front, as part of the Bowtie brand's overall image.