04 Auto Transmission 4 Cylinder Air Conditioning High Miles P/s P/b Clean Cheap on 2040-cars

Auto blog

A chopped-up General Motors EV1 shell sold for $23,662

Despite not having a VIN, a powertrain, a frame, or any doors, a decrepit General Motors EV1 shell recently sold for $23,662.10 on govdeals.com. Sold by the University of Cincinnati, the car — or what remains of it — is headed to an electric vehicle collection called The Beata Electric Motor Carriage Collection. Technically, the GM EV1 was the first mass-produced and purposed-built electric car in America. When it was released in 1996 for the 1997 model year, however, GM strictly leased the car as part of a "real-world engineering evaluation." The limited production run was meant to test real life with an EV and judge the interest from the public. GM only built 1,117 units, all of which were recalled, and most of them ultimately were sent to the crusher. But a select few were stripped of their powertrains and donated to universities and museums for educational purposes. One of those non-functioning cars made it to the University of Cincinnati in 2008. The post says it "has been in storage since," but it's not clear if the car sat in storage untouched or was stored and used by the university. According to EpiclyEpicEthan1, who posted the sales listing to r/cars, the car was purchased by The Beata Electric Motor Carriage Collection in Colorado. The Beata (derived from the Latin word for blessed) collection is a gathering of '90s OEM electric vehicles and a general EV hub. The website says the vehicles are used for testing, diagnostics, education, events, and overall preservation and documentation. The rare and niche collection also includes a 1993 Dodge/Chrysler TEVan, a 1997 Honda EV Plus, a 1999 Dodge/Chrysler EPIC EV, a 1998 Ford Ranger EV, a 2002 Toyota RAV4 EV LongRanger III, a Tesla Roadster, a 1998 Nissan Altra EV, a 1998 Chevrolet S-10 EV, a 2011 Nissan Leaf, and a 2012 Tesla Model S. Beata also has several other projects under construction such as the 2000 Toyota RXT-G Prototype, a 1997 RAV4 coupe EV prototype, the 1995 AC Propulsion eCivic EV, a 1995 ACP RXT-G Prototype LongRanger II, a 1995 ACP RXT-G Prototype LongRanger I, and a GM EV1. Beata acts as a resource for EV1 owners and helps place parts it finds and doesn't need. The parts it does need are put into building a working EV1. Beata's current EV1, which is 80 percent complete, is made up from more than 50 different parts sources, including from all three versions of the EV1, the 1994 LPF4 PreView "Impact" series, the 1997 EV1, and the 1999 EV1.

Car thief lands Saturn on Fresno roof

Residents of a Fresno, California apartment building recently awoke to debris falling from their ceiling after a car thief managed to execute a perfect parking job on the structure's roof. Police say 26-year-old Benjamin Tucker stole the Saturn sedan from a nearby house before striking either a curb or some rocks, vaulting the vehicle into the air and onto the roof. After seeing his predicament, Tucker leapt from the roof and fled the scene. Or at least he tried to. Tucker broke his leg in the fall and only made it around a quarter of a mile from the crash when police picked him up.
No one else was harmed in the stunt.
Tucker had two outstanding warrants for his arrest at the time for a hit-and-run and evading police. A special crane had to be called in to remove the Saturn from the apartment roof and the structure will indeed require repairs. Hit the jump for a news report on the incident.

GM recalling over 243,000 crossovers over possible seat belt defect

2010 Buick Enclave - Click above for high-res image gallery
The summer of 2010's recall hit parade continues unabated today, with General Motors having just announced that it is asking 243,403 owners of its 2009-2010 Lambda crossovers to bring their three-row haulers in for inspection. The culprit? Second-row seat belts in select Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook CUVs have "failed to perform properly in a crash."
According to GM, a second-row seat-side trim piece is to blame, as it can impede the upward rotation of the buckle after the seat is folded flat. As a result, if the buckle makes contact with the seat frame, cosmetic damage can occur, potentially requiring additional force to operate the buckle properly. So far, no great shakes, but in the process of applying that additional force, the occupant may push the buckle cover down to the strap, potentially revealing and depressing the red release button. As a result of this, the belt may not latch, or in certain cases, it may actually appear to be latched when, in fact, it isn't.