Slt 5.7 Liter Hemi Power Windows Power Locks Power Driver Seat Utility Body Nice on 2040-cars

Auto blog

2016 Ram 3500 Heavy Duty now offers 900 lb-ft of torque

After last year's bump to a massive 865 lb-ft of torque for its 2015 3500 Heavy Duty pickup, Ram certainly isn't taking a rest. The model already offers the best towing capacity and most torque in its class, but both figures are growing even higher for the 2016 model year. Now, customers that really need some grunt can order the Cummins 6.7-liter inline-six diesel in the 3500 with a staggering 900 pound-feet of torque and 385 horsepower. Ram claims that this huge figure is the most torque ever available in a mass production vehicle, and it tops the 2015 model by a healthy 35 lb-ft. The added grunt comes thanks to adjustments to the fuel delivery and the turbo's boost, and to better handle things, the rear axle gear now is held with 16 bolts, rather than 12. The tweaks also push the tow rating to an SAE J2807-certified 31,210 pounds, which is absolutely monumental. While not available with the 900 lb-ft version of the Cummins, the Ram 2500 also sees a tiny boost in its max tow rating. The trucks are now capable of hauling up to 17,980 lbs, versus 17,970 lbs last year. The 2016 Ram Heavy Duty trucks go into production in the third quarter and should start arriving at dealers during the fourth quarter of 2015. Prices for the 3500 start at $33,185 and $32,680 for the 2500, after the $1,195 destination charged, respectively. The company hasn't yet announced the cost for the 3500 with the 900 lb-ft Cummins diesel. 2016 Ram Heavy Duty Widens its Leadership Gap With a Triple-decker Presence: Best-in-class Power, Towing Capacity and Payload Capacity • 2016 Cummins 6.7-liter calibration hits a best-in-class 900 lb.-ft. of torque. The most torque ever offered in a mass-production vehicle • 2016 Ram 3500 crushes the competition with up to 31,210 pounds of SAE J2807-spec.

Autoblog Minute: 2017 Ford F-Series Super Duty truck reveal

Competition in the heavy duty truck segment heats up as we get our first look at the 2017 Ford F-Series Super Duty lineup. Autoblog's Adam Morath reports on this edition of Autoblog Minute. With commentary from Autoblog's senior editor Greg Migliore and an interview with Doug Scott of Ford Motor Company. Update: This post has been updated to reflect that the entire Ford F-Series Super Duty lineup is new for 2017, not just the F-250 model. Show full video transcript text [00:00:00] Competition in the heavy duty truck segment heats up as we get our first look at the 2017 Ford F-Series Super Duty trucks. I'm Adam Morath and this is your Autoblog Minute. As Ford prepares to release its new Super Duty line to the American worker, we spoke with Doug Scott of Ford's Truck Group to find out what customers can expect from this latest super duty offering: [00:00:30] [Doug Scott Interview] For more on what the changes to Super Duty mean for the segment we go to Autoblog's Greg Migliore: [00:01:30] [Greg Migliore Interview] Will a larger cabin and increased towing capacity help these heavy duty trucks take off like the smaller F150? And, how will the other HD giants, Chevy, GMC, and Ram respond? Truck fans, be sure to sound off in the comments below. For Autoblog, I'm Adam Morath. [00:02:00] Show Logo Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals. Chevrolet Ford GMC RAM Truck Autoblog Minute Videos Original Video ford f-250 f-250 super duty

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.