New 2013 Ram 3500 Tradesman Cummins Diesel Chrome Auto Free Ship/airfare on 2040-cars

Auto blog

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

Ram helps power Chrysler to 11% gain in May

Increasing consumer demand for Ram pickup trucks and big SUVs has helped to boost May sales for Chrysler. Ram sales were up a total of 24 percent year-over-year for the month of May. In addition, Dodge sales increased by 23 percent in May, with the standout Durango clocking a 24-percent year-over-year improvement (with an updated 2014 model in the wings, incentives are thick on the ground for 2013 inventory). Fiat and Jeep were up only a modest one percent, however, and Chrysler brand sales were down by two percent against last year's figures.
Chrysler is quite pleased overall with brand performance, saying that this May marks the company's strongest in the past six years. It was also the 38th consecutive month showing year-over-year sales gains.
Eight of the automaker's vehicles set sales records for May, as well: Jeep Wrangler and Compass, Dodge Avenger and Challenger, Fiat 500, Chrysler 200 and Ram pickups. Scroll down to read more detail in Chrysler's press release.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.