Laramie Diesel New 6.7l Nav Cd 4x4 Turbocharged Dual Rear Wheels Tow Hitch Abs on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.

Ram Laramie Longhorn's interior is a crass cacophony of cowboy cues

When we think of quality luxurious interiors, some of the first brands that come to mind are Audi and Volvo. They have elegant, simple interiors constructed from high-quality materials that are beautiful to see and to touch, and that's what makes them feel special and genuinely premium. The 2017 Ram 2500 Laramie Longhorn in our short-term fleet didn't get that message. What the Laramie Longhorn does is yell at you. It yells at you at that it's LUXURIOUS, and it's WESTERN. Open the door, and you're confronted with loads of saddle tan leather with contrasting black leather on the doors, armrest, and seat piping. This is reasonably modest, but if you pick a different color scheme than our Ram, that leather will have tooled filigree patterns, raising the volume of the interior's message. Right on the center console and on the seat backs there are huge brown embossed logos stitched into them proclaiming the trim level of the truck. It's all meant to evoke high-quality leather goods like saddles. But it's the same thin leather you've found in almost every other automobile on the market. The cushy cowboy theme continues on the dash. The satin-finish wood trim would normally be a nice touch, but it's overshadowed by the glitzy and chintzy rose-gold colored fake metal accents all over the dashboard, and even the instrument cluster. Perhaps it's meant to be more warm and down-to-earth than the cold aluminum-look panels usually in cars, but it's an odd color, and it looks more fake than faux-aluminum. It gets even worse when you discover that Ram stuck leather tooling design stickers all over that rose-gold plastic trim. And then you see them on the chrome plastic rings surrounding the gauges. Not only that, but those rings have some sort of stud shape molded into them. Is this Western enough yet? No! Of course not! Hop in the back seat, and you'll discover that the map pockets aren't just simple slots. They have a full flap with metal belt buckles like saddlebags (though the flap actually closes with magnets). And naturally, those buckles have fancy filigree designs in them. Then take a look at the floor, and the rubber floor mats have barbed-wire fence designs molded into them. Get it? Because there are barbed-wire fences on ranches out West where cowboys work! Yet, for all our complaining about cheap materials and a complete lack of subtlety, we're sure this sort of thing appeals to many truck buyers.