2022 Ram 3500 Big Horn on 2040-cars

Auto blog

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

2016 Ram 3500 Heavy Duty now offers 900 lb-ft of torque

After last year's bump to a massive 865 lb-ft of torque for its 2015 3500 Heavy Duty pickup, Ram certainly isn't taking a rest. The model already offers the best towing capacity and most torque in its class, but both figures are growing even higher for the 2016 model year. Now, customers that really need some grunt can order the Cummins 6.7-liter inline-six diesel in the 3500 with a staggering 900 pound-feet of torque and 385 horsepower. Ram claims that this huge figure is the most torque ever available in a mass production vehicle, and it tops the 2015 model by a healthy 35 lb-ft. The added grunt comes thanks to adjustments to the fuel delivery and the turbo's boost, and to better handle things, the rear axle gear now is held with 16 bolts, rather than 12. The tweaks also push the tow rating to an SAE J2807-certified 31,210 pounds, which is absolutely monumental. While not available with the 900 lb-ft version of the Cummins, the Ram 2500 also sees a tiny boost in its max tow rating. The trucks are now capable of hauling up to 17,980 lbs, versus 17,970 lbs last year. The 2016 Ram Heavy Duty trucks go into production in the third quarter and should start arriving at dealers during the fourth quarter of 2015. Prices for the 3500 start at $33,185 and $32,680 for the 2500, after the $1,195 destination charged, respectively. The company hasn't yet announced the cost for the 3500 with the 900 lb-ft Cummins diesel. 2016 Ram Heavy Duty Widens its Leadership Gap With a Triple-decker Presence: Best-in-class Power, Towing Capacity and Payload Capacity • 2016 Cummins 6.7-liter calibration hits a best-in-class 900 lb.-ft. of torque. The most torque ever offered in a mass-production vehicle • 2016 Ram 3500 crushes the competition with up to 31,210 pounds of SAE J2807-spec.

Ram boosts Heavy Duty truck claims for 2015 [w/video]

The heavy-duty truck segment boasts some of the tightest competition of any automotive niche in the US. Being able to tout just one best-in-class figure can be a marketing advantage over competitors, and Ram Trucks is adding one more accolade to its tally with a powertrain update for the 2015 Ram 2500 and 3500 Heavy Duty pickups. Ram now claims best-in-class ratings for torque, towing and payload, depending on configuration.
The major change comes for the 3500 HD with a boost in torque for its Cummins 6.7-liter, inline-six diesel engine. It now produces a meaty 865 pound-feet of twist, a boost of 15 lb-ft, which is the best figure in its segment, according to the company. To eek out the extra power, the mill has more aggressive fuel delivery, and the turbo has been recalibrated. Of course, more grunt would be meaningless if drivers couldn't do anything with it, and the tweaks help allow payload to grow to 7,390 pounds, up from a rating of 7,320 pounds last year. The max towing rating remains unchanged at 30,000 pounds, though.
The rest of the powertrain lineup carries over from last year. The base HD mill is the gasoline-fed 5.7-liter V8 with 383 hp and 400 lb-ft and a six-speed automatic. The next step up is a 6.4-liter V8 with 410 hp and 429 lb-ft. There are also three trims of the 6.7-liter Cummins diesel starting with 350 hp and 660 lb-ft with a six-speed manual gearbox. If buyers opt for a the 68RFE six-speed auto, they get 370 hp and 800 lb-ft. Finally, there's the updated, top-rung version with 385 hp and 865 lb-ft with an Aisin six-speed automatic transmission.