2014 Tradesman New Turbo 6.7l I6 24v Automatic 4wd on 2040-cars

Auto blog

Ram issues recall on heavy-duty pickup transfer cases

UPDATE: A previous version of this story said the issue only occurred in four-wheel drive. This is incorrect – issues are only exhibited in two-wheel drive. The Basics: Ram is recalling 930 3500, 4500, and 5500 heavy-duty pickups from model year 2016. The affected 3500s were built between July 24, 2015 and January 7, 2016, while the larger 4500/5500 trucks were screwed together between July 24, 2015 and October 8, 2015. The Problem: According to the official NHTSA bulletin, the "transfer case may have been manufactured with a misshapen main output shaft, creating voids that may cause a shaft fracture." If this happens, the vehicle could lose power. The driver might not be able to select park, either. Injuries/Deaths: FCA isn't aware of any injuries or deaths related to the issue. The Fix: Dealerships will replace the transfer case on affected trucks. If you own one: You probably don't. According to FCA spokesman Eric Mayne, dealers haven't delivered the majority of the affected trucks to customers. But if you really do own one, Mayne added that the issue only occurs in two-wheel drive. We'd advise keeping it in four-wheel drive until you can report to your local dealer. FCA kicked the recall off on August 10, so expect a mailed notification soon. Related Video:

2019 Ram 1500 prices released: What pickup will cost, by trim

One of the final pieces of information about the 2019 Ram 1500, and one of the most important, is finally here: the price. A base model Ram Tradesman, which nets a V6, the smaller four-door cab, a 6-foot 4-inch bed and two-wheel drive, starts at $33,340 with destination charge. That's a a bit over $1,000 more than the cost of the same outgoing Ram 1500 Tradesman. But you'll also get new features such as the eTorque mild-hybrid system and a touch-screen infotainment system with Uconnect. At the other end of the spectrum, the top-rung Ram 1500 Limited Crew Cab 4X4 V8 now starts at $59,035, an increase of almost $4,400 over the old model. Although the base price of the most basic and the most opulent Ram 1500s have gone up, some other things have become cheaper. You won't have to pay as much to upgrade to a V8, for instance. The plain 5.7-liter V8 with its 395 horsepower is $255 cheaper now, costing $1,195. To get that engine with the eTorque system costs more at $1,995. The RamBox bed-side storage bins are $300 cheaper now at $995. The Rebel trim has a better entry-level price, too. The base version with the smaller cab, four-wheel drive (the only drivetrain available with the small cab) and V6 with eTorque starts at $46,340. That just slips under the $46,690 price of the outgoing base Rebel with two-wheel-drive, and is over $2,000 less than the old Rebel with four-wheel drive that started at $48,790. Of course, the outgoing model was only available with the larger "Crew Cab" four-door body. Adding that larger body to the new Rebel will probably offset the cost savings. Here's the entire 2019 Ram sheet of base prices by trim/configuration: Related Video:

FCA recalls 2 million Ram trucks over airbag issues

Airbag issues have prompted Fiat Chrysler Automobiles to issue another pair of recalls. The two separate issues both affect Ram pickups, one campaign stemming from oversensitive sensors, the other from a wiring harness. Between them, the problems affect an estimated combined total of some 2 million units. The first recall affects 2013-15 Ram 1500, 2500, and 3500 trucks, specifically four-door models, manufactured between June 20, 2012, and January 26, 2015. The calibration of the side impact sensor in those affected units may to be too sensitive. As a result, if the door is slammed too hard, the side-curtain airbag and seatbelt pre-tensioner may inadvertently activate. FCA reports that this issue affects an estimated 667,406 units in the United States, plus 153,011 in Canada, a further 8,272 in Mexico, and another 14,847 in markets outside of North America, amounting (in Chrysler's estimation) to less than 0.005 percent of those vehicles produced. The automaker says it is aware of two minor injuries (but no accidents) that may have resulted from the glitch, and is taking action to have the Occupant Restraint Control module recalibrated in the affected units. The second issue also affects Ram pickups, including 1500, 2500, 3500, 4500, and 5500-series models from the 2012 to 2014 model years, built between January 18, 2011, and October 7, 2014, and fitted with the optional Electronic Vehicle Information Center. The problem here stems from a wiring harness in the steering wheel that may rub against a retainer spring in the air bag control module, which in turn could cause an electrical short and deploy the driver's side air bag unexpectedly. In the United States alone, the issue is estimated to affect 1,060,531 units, which will need to be inspected and, where necessary, have their steering wheel wiring harnesses secured, with protective caps added to the ends of the airbag retainer spring. These do not represent the first issues we've seen from Fiat Chrysler in recent days. The automaker recently issued a recall for approximately 1.4 million vehicles to have their Uconnect software updated to prevent hacking. A few days ago it also announced a recall for 350,000 Dodge Journey (and Fiat Freemont) crossovers to secure loose engine covers. And the National Highway Traffic Safety Administration is expected to issue Fiat Chrysler Automobiles a $105-million fine for mishandling other recent recalls and safety issues.