2014 Ram 3500 Laramie on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

FCA goes all-in on Jeep and Ram brands on cheap gas bet

It's no surprise that as SUV and truck sales remain strong in the wake of unusually cheap gas, Jeep and Ram sales are taking off. What is a surprise is that FCA CEO Sergio Marchionne thinks that cheap gas will be a "permanent condition," and feels strongly enough about it to change up North American manufacturing plans. Jeep appears to be the biggest beneficiary of the product realignment. In addition to increasing the sales estimates for the brand worldwide upwards to 2 million units a year by 2018, the brand will get a flood of investment for new product and powertrains. Consider the Wrangler Pickup to be part of the salvo, as well as the Grand Wagoneer three-row announced in 2014 as part of the original five-year plan. The Wrangler four-door will get at least two new powertrains, a diesel and mild hybrid version, in its next generation. That mild hybrid powertrain may utilize a 48-volt electrical system like the one that's being developed by Delphi and Bosch – which the suppliers think will be worth a 10 to 15 percent fuel economy gain at a minimum. Down the road, in the 2020s, the Wrangler could adopt a full hybrid system. The diesel powertrain is planned for 2019 or 2020. The Ram 1500 is also pegged to receive a mild hybrid system, again potentially based on 48-volt architecture, sometime after 2020. Lastly, Jeep and Ram will take over some of the production capacity of existing plants. The Sterling Heights, MI, plant that builds the Chrysler 200 will now build the Ram 1500; the Belvidere, IL, facility that produces the Dodge Dart will take over Cherokee output; the big Jeep facility in Toledo, OH, will be used for increased Wrangler demand. In 2015, according to FCA's numbers, car and van demand went down by 10 percent, but SUV demand went up 8 percent and truck demand 2 percent. Considering that these are high-margin vehicles, FCA can't ignore the math. FCA also won't build any new factories to supplement production to meet demand, but instead are reshuffling production priorities. Think of it this way: FCA is gambling on cheap gas being a permanent part of our lives, at least into the 2020s. By doubling down on SUVs and trucks, the company stands to win big, unless a spike in gas prices changes the landscape. FCA isn't talking about a Plan B, so they're all in. It'll be interesting to see how this plays out.

Peugeot E-Boxer seems like it would make a nice electric Ram ProMaster

Though electric cars, and especially pickup trucks, are the hot zero-emissions battlefield, there's another sector that's heating up: commercial vans. Startups such as Rivian and Bollinger have announced plans for vans, and Ford has shown a prototype of an electric Transit. It seems Stellantis is slightly ahead of the curve, though, as it has revealed details of its electric vans with the Peugeot E-Boxer. And the reason you should care is that the E-Boxer and gas-powered Boxer are nearly identical to the American-market Ram ProMaster and Italian Fiat Ducato. Powering the E-Boxer is a single electric motor at the front. It's not particularly powerful with just 122 ponies, but it has a more respectable 192 pound-feet of torque. Top speed is limited to 68 mph, which would probably need to be raised if these vans were offered in the U.S. Supplying power is one of two available battery packs: The shorter models get a 37-kWh battery that is rated for 124 miles of range on the WLTP cycle; longer models get a 70-kWh battery rated by WLTP for 211 miles. Those numbers would likely be lower in American EPA testing. While the range isn't incredible, enormous range likely isn't as important for delivery vans that might operate locally. These vans also come with DC fast charging in case more range is needed quickly. Though not quick, the Peugeot E-Boxer doesn't sacrifice on practicality. No cargo space is sacrificed for the electric powertrain, so you can fit just as much into one as a similarly configured gas model. Payload capacity is comparable to the gas vans, even the V6 ProMaster, too, with a maximum of 4,167 pounds. This number does vary based on configuration, just like cargo space. Peugeot will offer it in four different lengths with three roof heights as well as chassis and cutaway cab models. So it's just as configurable as the regular version. With some adjustment to how quick the E-Boxer can go, it would seem like it could be offered in the U.S. and beat some competitors to the punch. It's all built on the existing Ram ProMaster platform that we get here. And electric power would seem appealing to businesses that need delivery vans: lower fuel and maintenance costs. Time will tell if Stellantis sees things the same way. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2018 Volkswagen California Review