2011 Ram 3500 Hd 4x4 Crew H.o. Diesel Dually Tow 53k Mi Texas Direct Auto on 2040-cars

Auto blog

Ram with a Hellcat V8 coming? Could be, but let's review the evidence

While Fiat-Chrysler has gradually been stuffing bigger V8s into everything it can, one brand that hasn't received any SRT or Hellcat love is Ram. This, despite showing a Raptor-fighting TRX concept with a detuned engine in the fall of 2016. But according to Allpar, there may be a Ram 1500 coming in the near future with the fabled supercharged V8, and at full power. Interesting theory, but let's take a closer look. The two bits of evidence the site points out are (a) an anonymous inside source saying a vehicle is in development, and (b) a displayed time in Ram press photos. If you look closely, some of the Ram interiors show the time 7:07 on the infotainment display. This corresponds with the Hellcat engine's 707 horsepower. Allpar further speculates that the vehicle will be Rebel-based due to a preponderance of the number in Rebel interiors. This wouldn't be the first time FCA has hinted at a future model's power via infotainment time, either, as it did so with the Challenger Demon. View 6 Photos There are some holes in this theory, though. We went back and looked at the press photos of the interiors, and the 7:07 time shows up on Bighorn Rams, too. And not every single Rebel interior has the time. There's at least one that shows the time 8:29, which appears on various other Ram interior shots. Also, while FCA did manage to make a full-time all-wheel-drive system for the Grand Cherokee Trackhawk to stand up to the Hellcat's ferocious power, we doubt that drivetrain would be used in a Ram, since it's a much different application. The final nail in this theory's coffin might be that the head of Ram Trucks communication told us that the times in the images are a "complete coincidence" and that "this theory is all speculation." All things considered, we think the odds of a Hellcat-powered Ram reaching production soon, particularly an off-road version like Allpar suggests, is pretty iffy. We wouldn't rule out some sort of Hellcat-powered Ram completely. At the very least, putting a Hellcat V8 into a two-wheel-drive Ram for a street truck would make loads of sense. It would be less expensive to develop compared to a Raptor competitor, it wouldn't have any existing competition, and it could capitalize on the history of the Viper-powered Ram SRT-10 from the mid-2000s. And as we've seen, FCA has no problem stuffing absurdly powerful V8s into everything it can, from Charger to Durango to Grand Cherokee. So, don't count on a Hellcat-powered Ram yet.

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.