2023 Ram 2500 Powerwagon on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

FCA goes all-in on Jeep and Ram brands on cheap gas bet

It's no surprise that as SUV and truck sales remain strong in the wake of unusually cheap gas, Jeep and Ram sales are taking off. What is a surprise is that FCA CEO Sergio Marchionne thinks that cheap gas will be a "permanent condition," and feels strongly enough about it to change up North American manufacturing plans. Jeep appears to be the biggest beneficiary of the product realignment. In addition to increasing the sales estimates for the brand worldwide upwards to 2 million units a year by 2018, the brand will get a flood of investment for new product and powertrains. Consider the Wrangler Pickup to be part of the salvo, as well as the Grand Wagoneer three-row announced in 2014 as part of the original five-year plan. The Wrangler four-door will get at least two new powertrains, a diesel and mild hybrid version, in its next generation. That mild hybrid powertrain may utilize a 48-volt electrical system like the one that's being developed by Delphi and Bosch – which the suppliers think will be worth a 10 to 15 percent fuel economy gain at a minimum. Down the road, in the 2020s, the Wrangler could adopt a full hybrid system. The diesel powertrain is planned for 2019 or 2020. The Ram 1500 is also pegged to receive a mild hybrid system, again potentially based on 48-volt architecture, sometime after 2020. Lastly, Jeep and Ram will take over some of the production capacity of existing plants. The Sterling Heights, MI, plant that builds the Chrysler 200 will now build the Ram 1500; the Belvidere, IL, facility that produces the Dodge Dart will take over Cherokee output; the big Jeep facility in Toledo, OH, will be used for increased Wrangler demand. In 2015, according to FCA's numbers, car and van demand went down by 10 percent, but SUV demand went up 8 percent and truck demand 2 percent. Considering that these are high-margin vehicles, FCA can't ignore the math. FCA also won't build any new factories to supplement production to meet demand, but instead are reshuffling production priorities. Think of it this way: FCA is gambling on cheap gas being a permanent part of our lives, at least into the 2020s. By doubling down on SUVs and trucks, the company stands to win big, unless a spike in gas prices changes the landscape. FCA isn't talking about a Plan B, so they're all in. It'll be interesting to see how this plays out.

Italian coachbuilder wraps a modern-day Citroen van in a retro skin

Italian coachbuilder Caselani resurrected an obscure, often-forgotten model from Citroen's past to offer van buyers an additional retro-styled option. Called Type HG, it's based on the current-generation Citroen Jumpy. One of the French carmaker's best-known vintage vans is the Type H, which was built with only minor changes from 1947 to 1981. It's aged into a sought-after classic that's popular as a food truck and as a camper from Paris to Sydney. Few realize Citroen planned to release a smaller model named Type G which looked almost exactly like the H but used an air-cooled flat-twin engine shared with the 2CV. Several prototypes were made, but the project was canned in favor of the 2CV-based, nine-horsepower AU van released in 1951. It's this little-known prototype that only exists in Citroen's official heritage collection and in the minds of the most indoctrinated French car enthusiasts that Caselani chose to bring into the 21st century. And, because the Type G (shown below) was a shrunken copy of the Type H from a design standpoint, making a body kit that fits the Citroen Jumpy was relatively simple. Caselani liberally borrowed styling cues from its modern version of the Type H, which is based on the larger Citroen Jumper sold as the Ram ProMaster in the United States. It adds a new-look front end with a vertical grille, chromed chevrons, and round headlights positioned as far out of the body as regulations permit, corrugated body panels, and a redesigned rear end. Whitewall tires are optionally available. Caselani offers the Type HG as a passenger van, a crew-cab van, and a panel van. Pricing starts at 29,400 euros before taxes are factored in, a sum that represents about $35,000 and that corresponds to a short-wheelbase panel model powered by a 100-horsepower, four-cylinder turbodiesel engine. Alternatively, motorists who already own a Jumpy can purchase the transformation kit on its own for 14,800 euros (about $17,500). For added peace of mind, Caselani pointed out the conversion was created with Citroen's input, and the brand authorized the kit. We know what you're thinking: what on earth is a Jumpy? Glad you asked! It's a van positioned in the middle of Citroen's commercial range. It slots between the Berlingo, which competes in the same segment as the Ford Transit Connect, and the Jumper, which is marketed as an alternative to the Ford Transit.