2020 Ram 2500 Laramie on 2040-cars

Auto blog

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights

Daily Driver: 2015 Ram ProMaster Cargo

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Ram ProMaster Cargo, reviewed by Seyth Miersma. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. Show full video transcript text [00:00:00:00] I'm in a vehicle that really kind of belies the name of this video series, Daily Driver. This is the 2015 Ram Promaster Cargo Van. I'm in the high roof extended length version of it. You can see that it's got an empty cargo bay behind me. It's a little strange because what I'm doing right now is commuting in it, which is definitely not what this van is made to do. The single strongest attribute of the Promaster [00:00:30:00] package that I found was its maneuverability at low speeds in and around town. That wasn't really something that I expected. I knew from driving the rest of the big vans in this segment. I've been in various Sprinters over the years, although not the brand new one, and I put a lot of miles actually on a Nissan NV. They're all meant to be more nimble than they would seem from their exterior, but the Ram just feels kind of a class above. It turns on a dime. It's really, really easy to [00:01:00:00] pull up close to a curb or another car and be able to just get in and out of a space with very little room around you. I had no problem getting up to speed with the rest of traffic. Merging and passing aren't really an issue. Sometimes you'll hear her struggle a little bit if you really put your foot in and you're trying to get around somebody, but that's just wind resistance and curb weight man, that's too be expected. Another aspect that I was really impressed with with the Promaster is the 3.6 [00:01:30:00] liter V6 engine, both in terms of its performance and its economy. It's putting out out 280 horsepower, 258 pound-feet of torque. It's a huge van. It's not quick. The cargo area back there is really nice. Not only is it tall enough that I can stand up in it. I mean, this vehicle is close to nine feet overall from the exterior dimensions. Access to the cargo area is just as easy as you would hope for too. You got a big, big sliding door over here. The rear doors open completely [00:02:00:00] flat so that it's easy to both maneuver and to get stuff in and out, obviously. The load floor is pretty low. Easily accessible. You've got the Uconnect screen with the nicer head unit.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.