2016 Ram 2500 Tradesman Crew Cab 4x4 on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Chrysler 3.0L EcoDiesel V6: Autoblog Technology of the Year finalist

Offering a diesel engine in an American pickup is anything but new - Ford, General Motors and Chrysler all offer excellent and almost impossibly powerful oil-burning engines in their various fullsize trucks. What is new and novel about the 3.0L EcoDiesel, though, is its size, and the variety of vehicles that use it. It's the smallest engine, as far as displacement is concerned, currently offered in a large truck in the US, and, for 2014 and 2015, it is available in the Ram 1500 and the Jeep Grand Cherokee.
Though it may be small, it's got muscle. While 240 horsepower isn't particularly impressive these days, the engine's 420 pound-feet of torque more than makes up for that. The torque rating is even greater force than even the big 5.7-liter Hemi can muster. Chrysler's well-regarded eight-speed automatic transmission makes the most of all that bull-headed pulling power in both the Ram and Grand Cherokee. Chrysler claims the Ram EcoDiesel 1500 can tow as much as 9,200 pounds when properly equipped, which makes it "90-percent of the Hemi with a night and day difference in fuel economy."
Make no mistake; it's that promise of a sizable fuel economy improvement that many long-haul truckers will be most interested in. In the Ram 1500 that we tested for our Tech of the Year competition, the diesel engine costs $2,850 more than the gas-fed V8, and Ram estimates that EcoDiesel buyers will pay off their investment when compared to the Hemi engine in less than three years, which is considerably less time than the 4.5 or so years the average buyer will keep his or her fullsize pickup. The more you drive, the more you'll save, and the math proves equally as effective in the Jeep Grand Cherokee.

2019 Ram 1500 prototype gives us better glimpse of grille

Though we've managed to see most of the 2019 Ram 1500 from previous spy shots, we're still discovering new details here and there in spy photos. The latest batch shown above feature a truck with camouflage that covers most of the body, but curiously leaves the grille practically bare. The grille appears to be a version of what we saw on the nearly uncovered example from a few months ago. This time, that central bar is uncovered. In some ways, it looks like a sleeker version of the grille found on current Laramie Rams; the holes on either side of the emblem area are slimmed way down, and fit a single line. We can also see that those holes line up with the turn signal/daytime running light elements in the headlights. If you're not a fan of this new grille, the good news is that there will probably be a variety of different designs available, just as there are on current Rams. There aren't many other details to glean from this prototype, though. It appears to be the longer of the four-door models and has an impressive amount of glass area. The tailgate is fully covered, so we can't tell if this has a conventional drop-down gate or the split version we've seen on another prototype. We should know much more in about a month when the Ram 1500 is expected to appear at the 2018 Detroit Auto Show. For more about the Ram including renderings of the final truck, check out our post on what we know so far. Related Video: