2012 Dodge Ram 2500 Powerwagon 4dr 4wd 4x4 New Pickup Truck on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

2019 Ram 1500: Everything we know

We're not too far away from the sheet being pulled off the 2019 Ram 1500. But over and over, we've had spy shots come in revealing much of the truck before hand. The latest ones have given us a very clear look at the truck's new grille, which boldly does away with the signature crosshair grille. The main iteration we've seen is the one above with the "RAM" logo in the center flanked by split chrome bars. Chrome is used extensively elsewhere, too. The traditional Ram logo has also probably been binned, at least on the exterior, in favor of the broad Ram script currently seen on the Ram Rebel, Laramie Longhorn and Limited trims. Indeed, it seems like a change that the brand has subtly been trying to get its customers ready for, as a quick trip to the company website will show a greater reliance on those trim levels to visually represent each Ram model (including the heavy-duty 2500 and 3500). View 3 Photos Now, there will likely continue to be multiple grille options available as there is today to at least differentiate luxury and off-road models. In the renderings above, we show a version of the grille without those chrome bars. The rest of the truck in the rendering is based on what we saw when some gusty weather unofficially revealed the Ram 1500 to a spy photographer, as seen in the gallery below. View 18 Photos As for everything else we know about the 2019 Ram 1500 ... The Interior View 8 Photos We got pretty good shots of the new Ram interior a few weeks ago. There will be a huge, vertically oriented touchscreen available, possibly with updated UConnect interface software, flanked by hard buttons for the climate control system. A volume knob and redundant multi-purpose control knob will remain, as will the rotary transmission selector. New toggle switches below will be dedicated to various vehicle controls, and we would assume would remain in place throughout the trim level range. Smaller touchscreens will almost certainly be found on lower trims with a traditional array of climate controls between them and the toggles. It'll be steel View 5 Photos An intrepid magnet-wielding spy photographer back in August examined a 2019 Ram test mule's body panels and discovered the majority of them are steel. The hood and tailgate are aluminum, however. There will be a split tailgate option View 18 Photos Speaking of that tailgate, spy photos have shown that it will be available with a split, barn-door-style tailgate option.

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.