Express Hemi Red Bumper Nerf Bars Bed Liner Mp3 Sirius Xm Alloy Wheels Cruise on 2040-cars

Auto blog

Ram flubs ProMaster cargo capacity

The Ram ProMaster is going to look a little smaller on the inside, at least by way of its specification sheets, despite the sheet metal staying the same.
When Ram originally published the cargo capacity for its van, it simply did a direct conversion from the European rating of 15 cubic meters to 530 cubic feet. However, that didn't take into account the standard way internal measurements are calculated for the US. While the trucks have been on sale since October, the automaker just noticed the problem, and it's working on a revised figure. According to Automotive News, the new carrying ability for the ProMaster is likely between 450 and 475 cubic feet.
The difference stems from two standards for measuring capacity. In Europe, the entire internal area is determined and then obstacles like seats are subtracted from it. That means areas where freight could never go, like on top of seat backs, gets included in the figure. In the US, only the area where goods could actually fit is included, which leads to lower specs with no actual change in space.

2014 Ram Promaster reporting for duty

We already knew Chrysler would be getting its own version of the Fiat Ducato for use as the 2014 Ram Promaster, but it was just a question of when and what changes would be made. Well now we know. Though far from conventional-looking, the new Promaster should give Chrysler a fullsize van that is more competitive than the old Ram Van and more affordable than the Mercedes-based Dodge Sprinter.
Chrysler says it made numerous changes to transform the Ducato into the US-friendly Promaster, and the biggest changes were made to the powertrains. Standard equipment on the Promaster 1500 is the widespread 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque paired, which, paired with a six-speed automatic transmission, offers a gross combined weight rating (GCWR) of 11,500 pounds. Other models will get the 3.0-liter diesel inline four-cylinder producing 174 hp and 295 lb-ft of torque, giving this version a GCWR of 12,500 pounds, and this engine is mated to a six-speed automated manual transmission.

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video: