2025 Ram 1500 Laramie on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Ram pickups to keep it steel through 2020

One of the hottest topics in the industry these days is automakers' expanding use of aluminum, especially for vehicle bodies and platforms. While the lightweight metal has historically been the preserve of premium brands and sports cars, Ford shocked the industry when it announced that its 2015 F-150 would go aluminum-intensive for its new generation. As it turns out, the material change doesn't even mean a big jump in the prices for most of its trims. Possibly in reaction to the big change, General Motors is said to be using the lightweight metal in its next-gen trucks, too. That only leaves Ram as an open question among the domestics, and at least for now, the company is apparently in no hurry to push tin.
According to Reuters speaking with two, unnamed insiders, the Ram 1500 isn't getting an aluminum infusion until sometime after 2020. That's not to say the truck is going to be stagnant for the next half-decade or more, of course. According to Ram's five-year plan, there's a refresh for the 1500 coming in 2015 and much bigger changes on the way in 2017. Those same sources tell Reuters that further revisions aren't expected until at least 2021, which is when the aluminum could be added.
Fiat Chrysler Automobiles CEO Sergio Marchionne hasn't minced words about his thoughts on using the lightweight metal in pickups. "I have better use of aluminum in this house than a pickup truck," he said in May. Having said that, Marchionne was clear that if the material turns out to be revolutionary in the segment, the company would be willing to follow.

Cummins builds 2-millionth diesel for Ram

Ahead of a new Ram Heavy Duty that will debut sometime next year (check out the spy shots below), Chrysler and Cummins are celebrating a milestone in a 24-year partnership that has supplied the Ram pickup with diesel engines.
In its early years, the Cummins straight-six turbo diesel was rated at just 160 horsepower and 400 pound-feet of torque, and its clattering 12 valves could be heard from a mile away. Its most recent configuration still uses a straight-six layout, but displacement grew to 6.7 liters in 2007 allowing the engine to now produce up to 385 hp and a whopping 850 lb-ft of torque. While a rumored smaller Cummins engine for use in the light-duty Ram 1500 never materialized, the work-ready 6.7-liter Cummins turbo diesel accounts for 80 percent of all Ram HD sales.
Chrysler has not yet announced when and where this two-millionth engine will be on display, but you can read more about the engine and the partnership in the press release below.