2022 Ram 1500 Laramie on 2040-cars

Auto blog

FCA recalls Ram dualie chassis cabs to recalibrate top speed

If you're one of the 1,771 owners of a 2014-15 Ram 4500 or 5500 chassis cab with a 6.4-liter Hemi V8 and a dualie rear axle, you may be hearing soon from Fiat Chrysler Automobiles to bring your truck in to your local dealer. The reason, you ask? To have the speed limiter recalibrated. The problem, according to the statement below, is that while some of these trucks are electronically limited to 106 miles per hour, their tires can't safely maintain that speed. As a result, FCA is having dealers recalibrate the limiter to 87 mph. Of course, that's still well above the speed limit in most places, and "FCA believes it is unlikely that these trucks are operated at such speeds," but that it "is acting out of an abundance of caution." In addition to the 1,771 units in the United States, the company is recalling another 169 in Canada. In an unrelated campaign, FCA is also recalling a handful or two of 2015 Dodge Challengers – 72 in the US, six in Canada and three in Mexico – to secure a side-curtain airbag bolt that may have been improperly installed during assembly over the course of a ten-day period. In both cases, FCA says it is unaware of any complaints, accidents or injuries related to these issues. Statement: Speed Recalibration May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,771 trucks in the U.S. to recalibrate their maximum speed. The dual-wheel trucks are currently restricted to a top speed of 106 miles per hour (mph), but an internal specification review revealed top speed should be set at 87 mph, in accordance with their factory-equipped tires. The Company is unaware of any related injuries, accidents or customer complaints. Dealers will recalibrate vehicle speed accordingly. While FCA believes it is unlikely that these trucks are operated at such speeds, and that doing so would exceed posted speed limits in nearly every applicable jurisdiction, the Company is acting out of an abundance of caution. The campaign is limited to certain model-year 2014-15 Ram 4500/5500 Chassis Cabs equipped with 6.4-liter HEMI V-8 engines. An additional 169 vehicles are believed to be in Canada. Affected customers will be advised when they may schedule service. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403. ### Statement: Bolt May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 72 cars in the U.S.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.