2022 Ram 1500 Laramie on 2040-cars

Auto blog

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

Will Nissan's Cummins deal upset Ram's marketing mojo? [w/poll]

Ram has used Cummins engines in its heavy duty trucks since 1989, and it is the only pickup truck brand to use products from the Indiana-based engine maker. With the announcement that the next Nissan Titan will also use a Cummins powerplant, and a Nissan spokesman having already said "We will definitely leverage the Cummins brand name," a piece in Automotive News wonders whether the deal will affect the way Ram markets its tie-up with Cummins.
The question really is, how intense is this competition? While it is the first time that trucks from two different brands have used Cummins engines, they'll be two different engines in two different kinds of trucks; Nissan is going to put a 5.0-liter turbodiesel in a non-heavy-duty Titan, Ram only uses its 6.7-liter, inline six-cylinder turbodiesel in heavy-duty offerings. The diesel that Ram will offer in its light-duty, half-ton 1500 is a 3.0-liter V6 EcoDiesel with 240 horsepower and 420 pound-feet of torque - compared to about 300 hp and 550 lb-ft expected from the Titan's Cummins - and its marketing so far has focused on the fuel economy gains.
If Nissan was going to prove its commitment to the segment, it had to do something compelling. If we're talking about sales competition between Ram and Nissan, Ram has sold 201,633 trucks as of July this year, up 24.2 percent, 31,314 of those sales coming last month; Nissan has sold 10,020 Titans through the end of July, down 21.1 percent, and just 1,168 in July itself. Nissan's new truck boss - who hopped there from Ram - said that buyers have asked for a powerful turbodiesel in something other than a heavy duty pickup, and from what we've read on various comment boards, the pickup truck crowd is excited about Nissan's move.